Stahlwille Service MANOSKOP® 730/80 (24.5 x 28MM) Torque Wrench

Manufacturer: Stahlwille

Stahlwille Torque Wrench • Easy Setting and operation • Extremely resilient and durable • Wear-resistant switching mechanism • Torque range 4 – 800 Nm • No Need for manual reset to zero • Wear-free flex rod instead of a compression spring • Can be calibrated without disassembly • Clearly detected cut-out even at very at small torque settings • Rapid setting thanks to slide control

More...

Stock Number *

$0.00

Qty:

i h

Fabrication Time: 3-5 days

Overview
Contact Us

* Click-type

* Mount for shell tools

* All Stahlwille Torque Wrenches come with current calibration certificate AT NO CHARGE!

CODE	APPROX. TORQUE RANGE (Nm)	INCREMENTS (Nm)	Insert mm	b	h	L	LF	SF
CODE	APPROX. TORQUE RANGE (Nm)	INCREMENTS (Nm)	Insert mm	mm	mm	mm	mm	mm
50180005	160-800 Nm	20Nm	24.5x28	46.0	43.0	970.0	990.0	95.0
Use Shell adaptor No. 7370/80 to make 14 x18 mm insert tools fit

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.

Warning See 'Product Resources' tab above for Warning Information

PROP 65 WARNING

Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

>> Click here for more details <<

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252

Email

sales@lift-it.com

Address

1603 West Second Street
Pomona, CA 91766

Emergency Fabrication

909-524-9287

909-524-9204

Have a Question?

Your name *

Your email *

Comments *

Customers who bought this item also bought

Stahlwille 7370/80 - Shell Adaptor

Stahlwille 7370/80 Shell Adaptor Insert / Shell Tools • Output square drive in accordance with DIN 3120 • Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003 • In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used. This product may also be referred to as the following names:Stahlwille 7370/80 adaptor, 24.5x28 adaptor, 14x18 adaptor, stahlwille insert adaptor, 58290080

Click for details