Twin-Path® Bridles

Manufacturer: Lift-It

More...

$0.00

Qty:

i h

Made in the USA

Overview
Specifications
Product Resources
Contact Us

Twin-Path® Bridles are the lightest and strongest synthetic bridles available.

Twin-Path® Bridles with K-Spec® core yarn are less than half the weight of an equivalent, steel bridle assembly. With no heavy masterlink, the top eye fits effortlessly over the lifting mechanism.

Please specify top eye length and information for interfacing hardware. For additional versatility, hooks can attached or removed with G-Links™, see Slingmax® G-Link™ Sling Connectors and Information - G-Link Connectors.

Work Load Limits of 200,000 Lbs. are readily available.

If four leg bridles are required, use two Twin-Path® Bridles.

TWIN PATH^® BRIDLE SPECIFICATIONS (Capacities in Lbs.)
Stock Number	Vertical	60 Deg. Horizontal	45 Deg. Horizontal	Eye Width	Weight Lbs./Ft.
TUFXKSB 1000	10,000	8,500	7,000	3 In.	.34
TUFXKSB 1500	15,000	12,750	10,500	3 In.	.44
TUFXKSB 2000	20,000	17,000	14,000	3 In.	.61
TUFXKSB 3000	30,000	25,500	21,000	4 In.	.88
TUFXKSB 4000	40,000	34,000	28,000	4 In.	1.23
TUFXKSB 5000	50,000	42,500	35,000	5 In.	1.65

Please Note: Work Load Limits include both paths and are for one complete sling. Work Load Limits are based upon connection points that have equal or greater strength. Twin-Path® Extra Slings conform to the specifications and standards of: ASME B30-9, Chapter 6, Web Sling and Tie Down Association, WSTDA-RS-1, US Navy, NAVFAC P307, Section 14.6.4.3 and the Cordage Institute Roundsling Standard, CI-1905.

Slings can fail if damaged, misused, or overloaded. Inspect before use. Damaged slings shall not be used. Do Not Exceed Rated Capacity. Protect sling from being cut by load edges, protrusions, corners and abrasive surfaces. Avoid exposure to damaging chemicals and temperatures over 180 degrees (F). DEATH or INJURY can occur from improper use or maintenance.

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.

Warning See 'Product Resources' tab above for Warning Information

PROP 65 WARNING

Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

>> Click here for more details <<

Products specifications

Made in USA	Yes

Products specifications

Product Resources
Product Resource	Twin-Path Inspection
Product Resource	Twin-Path Considerations
Product Resource	Twin-Path Features
Product Resource	Safety Bulletin-English
Product Resource	Safety Bulletin-Spanish

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252

Email

sales@lift-it.com

Address

1603 West Second Street
Pomona, CA 91766

Emergency Fabrication

909-524-9287

909-524-9204

Have a Question?

Your name *

Your email *

Comments *