Vertical Net Debris Containment System (Inactive)

Vertical Net Debris Containment Systems are the most complete and cost-effective debris containment and guardrail system available. Vertical Net Debris Containment Systems protect workers from falling debris and serve as a guardrail. Easier and more economical to install than a guardrail, when installed properly, Vertical Debris Containment Nets eliminate the need for mid-rail and toe boards. Designed for use with traditional cable set-ups, Vertical Debris Nets are easy to remove, relocate, handle and store. Vertical Debris Nets attach to the cable with DBI-SALA snap-on clips. The bottom edge of the net is quickly secured using a power actuated tool to fire nails into the Tie-Down Plate.

• Made of performance-proven polyethylene mesh which is UV resistant and fire retardant. Vertical Debris Nets exceed OSHA lateral strength requirements of 200 Lbs. and New York City Construction Code requirements.
• High visibility so you know it is in place even from the ground level.
• Also useful as temporary partitions for crowd control or demolition.
• Vertical Debris Nets are 48 in. high x 100 ft. long. Vertical Net Debris Containment Systems are supplied complete with everything needed: Vertical Netting, snap-on Cable Clips for easy and secure net installation and Tie-Down Plates to replace toe-boards. 1/8 in. hole construction is compliant with most city requirements.

Easy installation—Easy to Remove and Relocate

• Works with traditional wire cable (not included) at top and fastened to floor at bottom.
• Top of net is attached with snap-on Cable Clips, placed 2 ft. (on center).
• Bottom of net is secured with Tie-Down Plates 5 ft. on center using Power Actuated Fasteners.

Please note: It is the user’s responsibility to furnish and install cable according to federal, state and local regulations.