Stahlwille 737/40 - Adaptor

Manufacturer: Stahlwille

Stahlwille 737/40 Adaptor Insert / Shell Tools • Output square drive in accordance with DIN 3120 • Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003 • In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used. may also be referred to as the following names and/or numbers: Stahlwille 737/40 Blank End Insert, 9x12 blank end insert, 14x18 blank end insert, 58270010,58270040

More...

Stock Number *

$0.00

Fabrication Time: 8-11 days

Overview
Contact Us

CODE	Outer Square Drive	Internal Square Drive	b	h	S
CODE	Outer Square Drive	Internal Square Drive	mm	mm	mm
58290040	14 x 18	9 x 12	28	21	21.5

For use with Insert Tools with 9 x 12 mm outer square

drive and/or on Torque Wenches with an internal

square drive of 14 x 18 mm.

Warning: Refer to the manufacturers

instructions for adjusting torque values.

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.

Warning See 'Product Resources' tab above for Warning Information

PROP 65 WARNING

Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

>> Click here for more details <<

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252

Email

sales@lift-it.com

Address

1603 West Second Street
Pomona, CA 91766

Emergency Fabrication

909-524-9287

909-524-9204

Have a Question?

Your name *

Your email *

Comments *

Product tags