Products
Torque Wrenches
Stahlwille Service MANOSKOP® 730/2 (9x12) Torque Wrench
Stahlwille Torque Wrench
• Easy Setting and operation
• Extremely resilient and durable
• Wear-resistant switching mechanism
• Torque range 4 – 800 Nm
• No Need for manual reset to zero
• Wear-free flex rod instead of a compression spring
• Can be calibrated without disassembly
• Clearly detected cut-out even at very at small torque settings
• Rapid setting thanks to slide control
Stahlwille Service MANOSKOP® 730/5 Torque Wrench
Stahlwille Torque Wrench
• Easy Setting and operation
• Extremely resilient and durable
• Wear-resistant switching mechanism
• Torque range 4 – 800 Nm
• No Need for manual reset to zero
• Wear-free flex rod instead of a compression spring
• Can be calibrated without disassembly
• Clearly detected cut-out even at very at small torque settings
• Rapid setting thanks to slide control
Stahlwille Service MANOSKOP® 730/80 (24.5 x 28MM) Torque Wrench
Stahlwille Torque Wrench
• Easy Setting and operation
• Extremely resilient and durable
• Wear-resistant switching mechanism
• Torque range 4 – 800 Nm
• No Need for manual reset to zero
• Wear-free flex rod instead of a compression spring
• Can be calibrated without disassembly
• Clearly detected cut-out even at very at small torque settings
• Rapid setting thanks to slide control
Stahlwille Standard MANOSKOP 720Nf/80 Torque Wrench
• Click-type
• Easy setting
• Dual stop signal
• Twin scales N-m/ft-lb
• Anticlockwise torqueing thanks to swap-over
square drive
• All the sensitive components are protected
by the sturdy tubular steel housing in the
U-shaped aluminum profile
• Calibration using Perfect Control Calibrating Unit No. 7794 or Calibration System No. 7706. Adjustment without disassembly.
• With certificate
• Display deviation value ±4%
Stahlwille Standard MANOSKOP 721Nf/100 Torque Wrench
• Click-type
• Easy setting
• Dual stop signal
• Twin scales N-m/ft-lb
• Anticlockwise torqueing thanks to swap-over
square drive
• All the sensitive components are protected
by the sturdy tubular steel housing in the
U-shaped aluminum profile
• Calibration using Perfect Control Calibrating Unit No. 7794 or Calibration System No. 7706. Adjustment without disassembly.
• With certificate
• Display deviation value ±4%
CDI Micrometer Adjustable Torque Wrenches - Dual Scale
FEATURES
• Dual scale, calibrated dual direction.
• Positive lock with spring loaded pull down lock ring.
• Fast, accurate and easy to set.
• Easy-to-read laser marked scale.
• Most feature quick release buttons which provide good socket retention
as well as easy socket removal.
• Ergonomic comfort-grip handle.
• Accuracy: ± 3% CW ± 5% CCW of indicated value, CW, from 20% to 100% of full scale.
• Meets or exceeds ASME standards, ISO 6789 standards.
• Individually serialized with matching certificate of calibration traceable to N.I.S.T.
CDI Williams Torque Multiplier - Planetary-Gear Mechanism
Features
• Designed where high torques are necessary for fastening or breaking
out stubborn fasteners.
• Allows operator safe and easy means of producing torque for job
requirements.
• Precision planetary gear multiplies the operator’s input from standard
torque wrenches.
• Can also multiply the torque from air-driven (non-impact) wrenches.
Stahlwille 1820 - Tool Holder
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 1821 - Tool Holder (14x18)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 1822 - Tool Holder (24.5x28)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 540a HD - Crow-Foot Spanner
Stahlwille 540a HD Crow Foot Spanner:
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Please refer to more detailed information on the Stahlwille 540a HD Crow Foot Spanner below.
Stahlwille 725/4 - Ratchet Insert (9x12)
Stahlwille Ratchet ¼” drive
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
This product may also be referred as a Stahlwille 725/4, Stahlwille Ratchet Insert, Stahlwille 58254004, Stahlwille Ratchet ¼” drive
Stahlwille 725B - Bit Ratchet Insert (9x12)
Stahlwille 725B, Bit Ratchet Insert, 58255004, 58255005
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
This product may also be referred as the Stahlwille 725B, Bit Ratchet Insert, 58255004, 58255005
Stahlwille 725L/5 - Ratchet Insert (9x12)
Stahlwille 725L/5 3/8” drive ratchet insert
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
This product may also be referred to as the following names:Stahlwille 725L/5, Stahwille 3/8” drive ratchet insert, 3/8” drive ratchet insert, Stahlwille 58151005
Stahlwille 725QR - Quick Release Ratchet Insert (9x12)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
More details below for the Stahlwille 58253004, Stahlwille 58253005 and Stahlwille 58253010 stock numbers.
Stahlwille 725QR/20 - QuickRelease Ratchet (14x18)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 731/100 - Open Ended Insert (22x28)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 731/40 - Open Ended Insert (14x18)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 731/80 - Open Ended Shell (24.5x28)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 731a/10 - Open Ended Insert (9x12)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 731a/40 - Open Ended Insert (14x18)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 732/10 - Open Ended Insert (9x12)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 732/10 - Ring Insert (9x12)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 732/100 - Ring Insert
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 732/40 - Ring Insert (14x18)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 732/80 - Ring Shell (24.5x28)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 732aG/10 - Ring Insert (9x12)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 732G/10 - Ring Insert (9x12)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 732TX/10 - TORX Insert (9x12)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 732TX/40 - TORX Insert (14x18)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 733/10 - Open Ring Insert (9x12)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 733a/10 - Open Ring Insert (9x12)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 734 - Square Drive Insert (14 x 18)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 734 - Square Drive Insert (9x12)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 734/100 Square Drive Insert (22x28)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 734/80 - Square Drive Shell (24.5x28)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 734F - Square Drive Insert (9x12)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 734L/5 - Square Ratchet Insert (9x12)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 735 - Ratchet Insert - Fine Tooth (14 x 18)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 735 - Ratchet Insert - Fine Tooth (9x12)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 735/100 - Ratchet Insert (22x28)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 735/65 - Ratchet Insert Fine Tooth (22x28)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 735/80 - Ratchet Shell (22x28)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 736 - Bit Holder Insert (9x12)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 736/40 - BIT Holder Insert (14x18)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 737/100 - Blank End Insert
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 737/40 - Adaptor
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 737/40 -Blank End Insert
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 7370 100 - Adaptor
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 7370/10 - Adaptor (14x18)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 7370/10-2 - Adaptor
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 7370/40 Adaptor (14x18)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 7370/40-1 Adaptor (14x18)
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.
Stahlwille 7370/80 - Shell Adaptor
Stahlwille Insert / Shell Tools
• Output square drive in accordance with DIN 3120
• Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003
• In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used.