Search
Menu Close

Turnbuckles

Turnbuckle Body Only Specifications - HG-2510

HG-2510
Quenched and Tempered. Hot Dip galvanized steel. UNC threads. Fatigue Rated. Meets the performance requirements of Federal Specifications FF-T-791b, Type 1, Form 1 - Class 2, except for those provisions required by the contractor.
Made in the USA

Jaw End Fitting Specifications - HG-4037

HG-4037
Quenched and Tempered. Hot Dip galvanized steel. Forged jaw ends are fitted with bolts and nuts on sizes 1/4” through 5/8” and pins with cotters on sizes 3/4” through 2-3/4”. Modified UNJ thread for improved fatigue properties. Fatigue Rated.
Made in the USA

Crosby® Jaw & Jaw Turnbuckle - HG-228

HG-228
End fittings are Quenched and Tempered; bodies are heat treated by normalizing. Hot Dip alvanized steel. Forged jaw ends are fitted with bolts and nuts for 1/4” through 5/8” and pins with cotters for 3/4” through 2-3/4” sizes. Modified UNJ thread on end fittings for improved fatigue properties.
Made in the USA

Eye End Fitting Specifications - HG-4037

HG-4037
Quenched and Tempered. Hot Dip galvanized steel. Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckle sizes 1/4” through 2-1/2”, a shackle one size smaller can be reeved through eye. Modified UNJ thread for improved fatigue properties. Fatigue Rated.
Made in the USA

Crosby® Eye & Eye Turnbuckle - HG-226

HG-226
End fittings are Quenched and Tempered; bodies are heat treated by normalizing. Hot Dip galvanized steel. Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckle sizes 1/4” through 2-1/2” a shackle one size smaller can be reeved through eye.
Made in the USA

Crosby® Hook End Fitting Specifications - HG-4037

HG-4037
Quenched and Tempered. Hot Dip galvanized steel. Hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigue properties.
Made in the USA

Crosby® Hook & Hook Turnbuckles - HG-223

HG-223
Meets the performance requirements of Federal Specifications FF-T-791b, Type 1, Form 1 - CLASS 5, and ASTM F-1145, except for those provisions required of the contractor.
Made in the USA
Shop By Category
Shop By Manufacturer
Lift-It