Menu Close

Stahlwille 7370/80 - Shell Adaptor

Manufacturer: Stahlwille
Stahlwille 7370/80 Shell Adaptor Insert / Shell Tools • Output square drive in accordance with DIN 3120 • Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003 • In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used. This product may also be referred to as the following names:Stahlwille 7370/80 adaptor, 24.5x28 adaptor, 14x18 adaptor, stahlwille insert adaptor, 58290080
i h
Fabrication Time: 3-5 days


CODE Internal
  Square Drive
  Square Drive
b h S
mm mm mm
58290080 24.5 x 28 14 x 18 36 26 70

For attaching 14 x 18mm insert tools.

Warning: Refer to the manufacturers instructions for adjusting torque values.

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.


Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to:

>> Click here for more details <<

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252



1603 West Second Street
Pomona, CA 91766

Emergency Fabrication



Have a Question?

Customers who bought this item also bought

Stahlwille Service MANOSKOP® 730/80 (24.5 x 28MM) Torque Wrench

Stahlwille Torque Wrench • Easy Setting and operation • Extremely resilient and durable • Wear-resistant switching mechanism • Torque range 4 – 800 Nm • No Need for manual reset to zero • Wear-free flex rod instead of a compression spring • Can be calibrated without disassembly • Clearly detected cut-out even at very at small torque settings • Rapid setting thanks to slide control