Search
Menu Close

Actek® Forged Swivel Hoist Ring

Manufacturer: Actek
All Hoist Rings are Proof Tested to 200% Work Load Limit, Swivels 360° - Pivots 180°, Material: Aircraft Quality Alloy.
More...
*
$0.00
i h
Made in the USA
  • All Hoist Rings are Proof Tested to 200% Work Load Limit
  • Swivels 360° - Pivots 180°
  • Material: Aircraft Quality Alloy
  • Finish: Phosphate Per Dod-P-16232f
    Cadmium Plated, Electroless
    Nickel, and Galvanized Available.
  • Design Factor: 5:1
  • Magnetic Particle Inspected
  • Certified Heat Treatment
  • Ideal For Outdoor Use

Hoist Ring Diagram

STANDARD - FORGED swivel hoist RING SPECIFICATIONS (Inches)

Stock

Number

Work Load

Limit (Lbs.)

Thread

Size

A

B

C

D

E

F

G

Torque

(Ft. /Lbs.)

Weight

(Lbs.)

56100

600

1/4"-20

1.32

1.40

1.16

.44

.50

3.29

2.38

5

1

56102

800

5/16"-18

1.32

1.40

1.16

.44

.50

3.29

2.38

7

1

56104

800

5/16"-18

1.32

1.40

1.16

.44

1.00

3.29

2.38

7

1

56106

1,000

3/8"-16

1.32

1.40

1.16

.44

.50

3.29

2.38

12

1

56107

1,000

3/8"-16

1.32

1.40

1.16

.44

1.00

3.29

2.38

12

1

56008

2,500

1/2"-13

2.23

2.40

1.97

.75

.75

5.60

4.05

28

4

56010

2,500

1/2"-13

2.23

2.40

1.97

.75

1.00

5.60

4.05

28

4

56012

2,500

1/2"-13

2.23

2.40

1.97

.75

1.25

5.60

4.05

28

4

56002

4,000

5/8"-11

2.23

2.40

1.97

.75

.75

5.60

4.05

60

4

56004

4,000

5/8"-11

2.23

2.40

1.97

.75

1.00

5.60

4.05

60

4

56006

4,000

5/8"-11

2.23

2.40

1.97

.75

1.25

5.60

4.05

60

4

56014

5,000

3/4"-10

2.23

2.40

1.97

.75

1.00

5.60

4.05

100

4

56018

5,000

3/4"-10

2.23

2.40

1.97

.75

1.50

5.60

4.05

100

4

56204

7,000

3/4"-10

2.95

3.20

2.62

1.00

1.00

7.48

5.40

100

9

56203

7,000

3/4"-10

2.95

3.20

2.62

1.00

1.25

7.48

5.40

100

9

56206

7,000

3/4"-10

2.95

3.20

2.62

1.00

1.50

7.48

5.40

100

9

56202

8,000

7/8"-9

2.95

3.20

2.62

1.00

1.00

7.48

5.40

160

9

56205

8,000

7/8"-9

2.95

3.20

2.62

1.00

1.25

7.48

5.40

160

9

56210

10,000

1"-8

2.95

3.20

2.62

1.00

1.25

7.48

5.40

230

9

56212

10,000

1"-8

2.95

3.20

2.62

1.00

1.50

7.48

5.40

230

9

56214

10,000

1"-8

2.95

3.20

2.62

1.00

2.25

7.48

5.40

230

9

56802

15,000

1 1/4"-7

3.73

4.00

3.28

1.25

2.00

9.35

6.75

470

18

56804

15,000

1 1/4"-7

3.73

4.00

3.28

1.25

2.75

9.35

6.75

470

18

56702

20,000

1 3/8"-6

3.73

4.00

3.28

1.25

2.75

9.35

6.75

540

19

56404

24,000

1 1/2"-6

3.73

4.00

3.28

1.25

2.75

9.35

6.75

800

19

Dimensions are subject to change without notice.

Warning

See Product Resources For Important Safety, Use and Inspection Infromation.

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.

PROP 65 WARNING

Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

>> Click here for more details <<
Products specifications
Made in USA Yes
Products specifications
Product Resources
Product Resource Product Spec Actek Safety Warning

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252

Email

sales@lift-it.com

Address

1603 West Second Street
Pomona, CA 91766

Emergency Fabrication

909-524-9287

909-524-9204

Have a Question?

*
*
*
Customers who bought this item also bought

Chicago Shoulder Eye Bolts

Chicago Hardware's shoulder pattern machinery eye bolts are made in the USA from drop forged steel that is heat treated for strength and ductility. There are several plating options such as self-colored, zinc plated or hot galvanized. Please contact us for pricing on zinc or hot galvanized. Threaded shanks will be supplied unless otherwise specified.

Crosby® G-209 Screw Pin Anchor Shackle

G-209 / S-209
G-209 / S-209

Crosby® Web Sling Shackle

S-281
S-281 Designed to connect web and roundslings to eyebolts and lifting lugs.

Reversed Eye Slings

Reversed Eye slings are nylon web slings which feature sling eyes and body that are covered by Bulked Nylon, also referred to as Cordura®, wear pads. Bulked Nylon wear pad material is four times more abrasion resistant than webbing used in regular nylon lifting slings, but provides no protection against cutting. The Reversed Eye lift strap is also referred to as a Return Eye sling. Since the body of Reversed Eye slings is based upon an endless sling design, the web strap eye is one half the overall body width. The sling eye can further be reduced by tapering the sling eye before installing the Cordura® wear pads on each side of the sling body. When you receive the Reversed Eye sling, the sling capacity tag is on the side OPPOSITE the working face or load contact surface of the sling. Responsible sling users in the sling, rigging and material handling industries always inspect the sling before each use. When abrasion is detected that does not penetrate into the load bearing sling webbing the sling user can rotate or “reverse” the sling eyes, which also provides a new bearing surface on the sling body. The bearing points of Reversed Eye hoisting sling-Standard (Type 6) eyes are 90° to the web sling body. The perpendicular relationship between the eye and body in a Reversed Eye lifting sling-Standard (Type 6) results in a better choke hitch, when compared to the Reversed Eye hoisting sling-Flat (Type 7). The Reversed Eye sling-Flat (Type 7) body is turned 180°, forming an eye, in the same plane as the sling body. The type 7 or flat Reverse Eye web sling is not frequently made, but provides a lower profile lifting sling for removal when space is limited. Type 6 and Type 7 Reversed Eye web slings can be used in choker, vertical or basket hitches. Standard widths for Reversed eye nylon web slings range from 2 inches to 6 inches. On request we can manufacture 8, 10 and 12 inch wide Reverse Eye lifting slings. Stock numbers for Reverse Eye slings do not reflect the overall sling width, but refer to the width of the component webbing, laid side by side to form up the body of the Reversed Eye lifting strap. An example would be, RE2-902 which would be the call out for a Reversed Eye web sling that is made from heavy duty nylon sling material (9800 Lbs. unsewn tensile strength- Class 7), 2 inches wide and two ply thick. The 2 inch material is sewn into an endless web sling configuration with the strands of the endless set side by side. After the eye buffers have been sewn to each side of the sling eye, 4 inch material is used to finish the fabrication of the nylon lifting sling. Sometimes it’s a hard sell to convince sling users that it is a better investment to spend more for a Reversed Eye sling. Reversed Eye web slings are roughly twice the price of an equivalent strength Eye and Eye sling. The combination of wear resistant materials, coupled with the ability to change out the bearing surfaces on the sling eyes and bodies make the Reversed Eye hoisting strap, the nylon sling of choice for professionals in the heavy duty sling, rigging and crane industries. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*

Sewn & Quick Sleeves - Bulked Nylon/Web

Sleeves cover both sides of the sling and can be moved to a specific location. Sleeves can also be re-positioned for quick and easy inspection of the sling.
*
Lift-It