Flat Hook

Manufactured from treated, polyester webbing, Lift-It® Truck Tie Down Assemblies are available in 3 inch and 4 inch web widths. Truck Tie Down Assemblies are lighter than chain or cable binders and are much easier to use and store. Polyester webbing is low stretch (approximately 3% at Work Load Limit) and webbing strength is unaffected by moisture. All loose ends are heat seared to prevent fraying. All Lift-It® Truck Tie Down Assemblies meet or exceed federal (DOT), state (CHP) and Commercial Vehicle Safety Alliance (CVSA) regulations and guidelines.

Work Load Limits for Truck Tie Down Assemblies are a function of web and fitting strength and sewing efficiencies. Generally, 3 Inch Truck Tie Down Assemblies are assigned a 4,000 Lbs. Work Load Limit. 4 Inch Truck Tie Down Assemblies are generally rated at 5,000 Lbs. Work Load Limit.

  The CVSA regulations and guidelines allow permissible levels of damage to Tie Down Assemblies. Lift-It® and other responsible manufacturers stipulate ZERO TOLERANCE for damage. If Tie Down Assemblies of any width, used in any application exhibit damage as described on page 364, the Tie Down must not be used for any purpose.

See all Sections under "Product Resources" for Important Safety, Use and Inspection Information. Dimensions are approximate and subject to change without notice.