Many of today’s multi-story buildings are built using “flying forms” to construct the concrete floors of the structure. These forms typically consist of a series of trusses which support a forming deck. Once a floor is poured the truss supports are lowered from the pour, pulled from the building and flown to the top of the building to repeat the process for the next floor. While the workers are placing the forming deck they are exposed to falls greater than 6 ft. It becomes very difficult to protect the workers using standard fall protection equipment as no structure exists above the workers to provide an anchorage for tie-off. Flying Form Netting Systems are a perfect solution to resolve the safety hazards associated with the use of flying forms.
- Provides passive fall arrest and debris retention.
- One time installation.
- Custom sizing required.
- UV protected nylon mesh.
Stock No. 4102003:
Flying Form Netting System
(You must specify size)
All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.
Warning
See 'Product Resources' tab above for Warning Information
PROP 65 WARNING
Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov
>> Click here for more details <<