Personal menu

NAS Strap Assemblies

Manufacturer: Lift-It

NAS 1212 and NAS 1213 Strap Assemblies are ordered by the stock number format shown. NAS 1212 Assemblies do not include a buckle. NAS 1213 Assemblies include a buckle. The two, different NAS assemblies may be combined to form a complete assembly as shown below. All nylon webbing is military specification: MIL-W-4088 or MIL-W-27265. NAS 1383, 1384 and 1385 Assemblies are also available.

More...

$0.00

Made in the USA

Overview
Specifications
Product Resources
Contact Us

NAS 1212 and NAS 1213 Strap Assemblies are ordered by the stock number format shown.

NAS 1212 Assemblies do not include a buckle.

NAS 1213 Assemblies include a buckle.

The two, different NAS assemblies may be combined to form a complete assembly as shown below. All nylon webbing is military specification:
MIL-W-4088 or MIL-W-27265.

NAS 1383, 1384 and 1385 Assemblies are also available.

TABLE I - End Code
End Style	NAS Code Letter
	A
	B
	C
	D
	E
	H
	J
	K

TABLE II - Webbing Code
NAS Code	Web Width (Inches)	Work Load Limit (Lbs.)
10	1"	600
15	1-1/2"	700
20	2"	833

TABLE III - Web Color
NAS Code	Color
P	Natural
R	Olive Drab

NAS 1212 STRAPS
1 in. wide, olive drab, nylon strap with delta ring at one end and hook and keeper at opposite end.
48 inch length.

NAS 1213 STRAPS
2 in. wide, olive drab, nylon strap with a narrow hook one end and a cam buckle opposite end.
22 inch length.

COMPLETE ASSEMBLIES
For complete assemblies
NAS 1212 portion must have
one plain end, code letter J.
Add 8 inches to the assembly length for the hand hold.

LENGTH TOLERANCES
Length is measured to the inside of rings and hooks; to the end of plain straps; to the tangent point of the pressure bar on buckles. Tolerance is + 1/4 in. up to 12 in. assembly length and/or + 1/2 in. over 12 in. assembly length.

See all Sections under "Product Resources" for Important Safety, Use and Inspection Information.

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.

Warning See 'Product Resources' tab above for Warning Information

PROP 65 WARNING

Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

>> Click here for more details <<

Products specifications

Made in USA	Yes

Products specifications

Product Resources
Product Resource	Tie Down Selection and Safety Info
Product Resource	Tie Down Assemblies
Product Resource	Tie Down Safety Bulletin - eng
Product Resource	Tie Down Safety Bulletin - esp

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252

Email

sales@lift-it.com

Address

1603 West Second Street
Pomona, CA 91766

Emergency Fabrication

909-524-9287

909-524-9204

Have a Question?

Your name *

Your email *

Comments *