Menu
Search
Search store Close
Shopping cart Close

You have no items in your shopping cart.

Menu Close
Picture of Ratchet Tie Down Assemblies – 6,666 lbs. WLL Picture of Ratchet Tie Down Assemblies – 6,666 lbs. WLL Picture of Ratchet Tie Down Assemblies – 6,666 lbs. WLL Picture of Ratchet Tie Down Assemblies – 6,666 lbs. WLL Picture of Ratchet Tie Down Assemblies – 6,666 lbs. WLL Picture of Ratchet Tie Down Assemblies – 6,666 lbs. WLL

Ratchet Tie Down Assemblies – 6,666 lbs. WLL

Manufacturer: Lift-It
Lift-It® Ratchet Tie Down Assemblies satisfy most transportation tie down requirements and feature a standard 18 inch fixed end. Other fixed end lengths, configurations and strengths are available. Lift-It® Ratchet Tie Down Assemblies are labeled to comply with CVSA guidelines, CHP Standards, North American Cargo Securement Standards, DOT regulations and WSTDA Recommended Standard Specifications.
More...
SKU: 4” x 30 FT.
*
$0.00
i h
Made in the USA

Lift-It® Ratchet Tie Down Assemblies satisfy most transportation tie down requirements and feature a standard 18 inch fixed end. Other fixed end lengths, configurations and strengths are available. Lift-It® Ratchet Tie Down Assemblies are labeled to comply with CVSA guidelines, CHP Standards, North American Cargo Securement Standards, DOT regulations and WSTDA Recommended Standard Specifications.

4” x 30 FT. WORK LOAD LIMIT – 6,666 LBS.


Stock No. 20-4A-30
Unit Weight-16 lbs.

Stock No. 20-F7-30
Unit Weight-21 lbs.

Stock No. 20-LP-30
Unit Weight-13 lbs.

Stock No. 15-3Y/5R-30*
Unit Weight-15 lbs.
* 5,000 Lbs. WLL

Stock No. 20-T7-30
Unit Weight-21 lbs.

Stock No. 20-3Z-30
Unit Weight-16 lbs.

  See all Sections under "Product Resources" for Important Safety, Use and Inspection Information.

Dimensions are approximate and subject to change without notice.
All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.
Warning See 'Product Resources' tab above for Warning Information

PROP 65 WARNING

Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

>> Click here for more details <<
Products specifications
Made in USA Yes
Products specifications
Product Resources
Product Resource Product Spec Assembly Options
Product Resource Product Spec Selection & Safety Info
Product Resource Product Spec Safety Bulletin-English
Product Resource Product Spec Safety Bulletin-Spanish

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252

Email

sales@lift-it.com

Address

1603 West Second Street
Pomona, CA 91766

Emergency Fabrication

909-524-9287

909-524-9204

Have a Question?

*
*
*
Customers who bought this item also bought
Picture of Van Beest® G-4161 Screw Pin Anchor Shackles

Van Beest® G-4161 Screw Pin Anchor Shackles

G-4161
Shackle Material:Bow and Shackle pin: High tensile steel, Grade 6 quenched and tempered. Van Beest® shackles are upset forged with no drop forge flashing marks. Van Beest® shackles have embossed information vs. raised sharp lettering which is ideal for synthetic lifting slings. These shackles also have a super smooth galvanized finished.
From $3.82
Picture of Eye & Eye Slings

Eye & Eye Slings

Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point unless otherwise specified. Eye & Eye nylon & polyester lifting slings featuring flat eyes can be used in all three hitches: choker, vertical and basket. Heavy duty nylon rigging slings featuring the Flat Eye and Eye design are made in widths ranging from as narrow as 1 inch and as wide as 12 inches. All Lift-It® Flat Eye & Eye slings feature protection at the sling eye bearing points. The extra protection wrapped around the sling eye provides additional service life as this is a critical wear area for all polyester and nylon rigging slings. Sling eyes are automatically tapered to a narrower width on Eye and Eye lifting slings that are over 3 inches in width. At Lift-It we do not charge extra to taper the eyes for your 2 inch wide rigging straps. Flat Eye, Eye and Eye nylon lifting slings used by crane and rigging customers around the world provide for the lowest profile eye available. Low profile eyes make sling removal easier when tight clearances are unavoidable. Nylon rigging slings that feature flat eyes are also referred to as double eye slings or Type 3 slings. If a more supple body composition is desired consider using Lift-It® polyester roundslings in the eye and eye style. Eye & Eye polyester round slings are formed by passing an exterior sleeve over the strands of the polyester roundsling. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*
From $18.52
Picture of Quad Leg - Eye & Eye Sling Bridle Assembly (MLB4)

Quad Leg - Eye & Eye Sling Bridle Assembly (MLB4)

(MLB4) Four Leg Bridle Assembly capacities are based on three legs carrying the assigned capacity. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*
Click for details
Lift-It
Information
My account
Customer service
CONTACT US
Copyright © 2023 Lift-It. All rights reserved. | Privacy Policy