Search
Menu Close

Single Leg Chain Slings

Manufacturer: Gunnebo
CHAIN SLING TYPE: Single Leg, Bridle Assembly, Adjustable, Endless or Choker.
More...
*
*
*
$0.00
i h

The following information must be specified on orders and should be used for chain sling inquiries:

  1. CHAIN SLING TYPE: Single Leg, Bridle Assembly, Adjustable, Endless or Choker.
  2. CHAIN SLING STOCK NUMBER: SOG, DOS, TOF, QOG
  3. CHAIN GRADE: GR 80 OR GR 100
  4. TOP AND BOTTOM FITTINGS: Masterlink, Grab Hook, Foundry Hook, etc.
  5. SIZE: The size of the material from which the chain is made.
  6. REACH: Length, including attachments, measured from bearing point to bearing point.
CHAIN SLING ORDER CODES

Single Leg Chain Slings

Type

One End

Opposite End

SG

Plain

Grab Hook

SOO

Oblong Link

Oblong Link

SOS

Oblong Link

Sling Hook

SOSKN

Oblong Link

Sling Hook w/ Half Link

SOG

Oblong Link

Grab Hook

SOF

Oblong Link

Foundry Hook

SOBK

Oblong Link

Self Locking Hook

SOBKL

Oblong Link

Self Locking Hook-Swivel

SGG

Grab Hook

Grab Hook

SSS

Sling Hook

Sling Hook

SSG

Grab Hook

Sling Hook

ASOS

Oblong Link

Adjustable W/Sling Hook

Type A

Adjuster

No Chain

Type B

Adjuster

12 Inches of Chain

SOLK

Oblong Link

Choker Hook

  Refer to "Product Resources" for Important Safety, Use and Inspection Information. .

Please Note:
Type “A” Adjuster has the cradle grab hook attached to masterlink with a coupling link.
Type “B” Adjusters are furnished with approximately 12 inches of chain in adjuster legs.
Cradle Grab Hooks are standard.
If so equipped, all Hooks will be furnished with latches.

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.

PROP 65 WARNING

Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

>> Click here for more details <<
Products specifications
Product Resources
Product Resource Product Spec Guidelines for Chain Sling Use
Product Resource Product Spec BK Hook Information
Product Resource Product Spec Safety Bulletin-English
Product Resource Product Spec Safety Bulletin-Spanish

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252

Email

sales@lift-it.com

Address

1603 West Second Street
Pomona, CA 91766

Emergency Fabrication

909-524-9287

909-524-9204

Have a Question?

*
*
*
Customers who bought this item also bought

Eye & Eye Slings

Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point unless otherwise specified. Eye & Eye nylon & polyester lifting slings featuring flat eyes can be used in all three hitches: choker, vertical and basket. Heavy duty nylon rigging slings featuring the Flat Eye and Eye design are made in widths ranging from as narrow as 1 inch and as wide as 12 inches. All Lift-It® Flat Eye & Eye slings feature protection at the sling eye bearing points. The extra protection wrapped around the sling eye provides additional service life as this is a critical wear area for all polyester and nylon rigging slings. Sling eyes are automatically tapered to a narrower width on Eye and Eye lifting slings that are over 3 inches in width. At Lift-It we do not charge extra to taper the eyes for your 2 inch wide rigging straps. Flat Eye, Eye and Eye nylon lifting slings used by crane and rigging customers around the world provide for the lowest profile eye available. Low profile eyes make sling removal easier when tight clearances are unavoidable. Nylon rigging slings that feature flat eyes are also referred to as double eye slings or Type 3 slings. If a more supple body composition is desired consider using Lift-It® polyester roundslings in the eye and eye style. Eye & Eye polyester round slings are formed by passing an exterior sleeve over the strands of the polyester roundsling. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*

Endless Round Slings

Polyester endless round slings from Lift-It Manufacturing. Endless round sling configurations enable the user to rotate hook and load contact points, resulting in increased sling longevity. Lift-It® Polyester Roundslings are made of polyester core yarn covered by a seamless, tubular cover. The seamless round sling construction and tubular design of the cover helps to eliminate the premature rupturing of covers, characteristic of seamed roundslings. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*

Reversed Eye Slings

Reversed Eye slings are nylon web slings which feature sling eyes and body that are covered by Bulked Nylon, also referred to as Cordura®, wear pads. Bulked Nylon wear pad material is four times more abrasion resistant than webbing used in regular nylon lifting slings, but provides no protection against cutting. The Reversed Eye lift strap is also referred to as a Return Eye sling. Since the body of Reversed Eye slings is based upon an endless sling design, the web strap eye is one half the overall body width. The sling eye can further be reduced by tapering the sling eye before installing the Cordura® wear pads on each side of the sling body. When you receive the Reversed Eye sling, the sling capacity tag is on the side OPPOSITE the working face or load contact surface of the sling. Responsible sling users in the sling, rigging and material handling industries always inspect the sling before each use. When abrasion is detected that does not penetrate into the load bearing sling webbing the sling user can rotate or “reverse” the sling eyes, which also provides a new bearing surface on the sling body. The bearing points of Reversed Eye hoisting sling-Standard (Type 6) eyes are 90° to the web sling body. The perpendicular relationship between the eye and body in a Reversed Eye lifting sling-Standard (Type 6) results in a better choke hitch, when compared to the Reversed Eye hoisting sling-Flat (Type 7). The Reversed Eye sling-Flat (Type 7) body is turned 180°, forming an eye, in the same plane as the sling body. The type 7 or flat Reverse Eye web sling is not frequently made, but provides a lower profile lifting sling for removal when space is limited. Type 6 and Type 7 Reversed Eye web slings can be used in choker, vertical or basket hitches. Standard widths for Reversed eye nylon web slings range from 2 inches to 6 inches. On request we can manufacture 8, 10 and 12 inch wide Reverse Eye lifting slings. Stock numbers for Reverse Eye slings do not reflect the overall sling width, but refer to the width of the component webbing, laid side by side to form up the body of the Reversed Eye lifting strap. An example would be, RE2-902 which would be the call out for a Reversed Eye web sling that is made from heavy duty nylon sling material (9800 Lbs. unsewn tensile strength- Class 7), 2 inches wide and two ply thick. The 2 inch material is sewn into an endless web sling configuration with the strands of the endless set side by side. After the eye buffers have been sewn to each side of the sling eye, 4 inch material is used to finish the fabrication of the nylon lifting sling. Sometimes it’s a hard sell to convince sling users that it is a better investment to spend more for a Reversed Eye sling. Reversed Eye web slings are roughly twice the price of an equivalent strength Eye and Eye sling. The combination of wear resistant materials, coupled with the ability to change out the bearing surfaces on the sling eyes and bodies make the Reversed Eye hoisting strap, the nylon sling of choice for professionals in the heavy duty sling, rigging and crane industries. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*

Van Beest® G-4161 Screw Pin Anchor Shackles

G-4161
Shackle Material:Bow and Shackle pin: High tensile steel, Grade 6 quenched and tempered. Van Beest® shackles are upset forged with no drop forge flashing marks. Van Beest® shackles have embossed information vs. raised sharp lettering which is ideal for synthetic lifting slings. These shackles also have a super smooth galvanized finished.

Crosby® G-209 Screw Pin Anchor Shackle

G-209 / S-209
G-209 / S-209
Lift-It