Menu Close

Stahlwille 7370/10-2 - Adaptor

Manufacturer: Stahlwille
Stahlwille 7370/10-2 Adaptor Insert / Shell Tools • Output square drive in accordance with DIN 3120 • Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003 • In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used. This product may also go by the following names: Stahlwille 7370/10-2 adaptor, 9x12 adaptor, 14x18 adaptor, stahlwille insert adaptor, 58290012,58290042
i h
Fabrication Time: 3-5 days

* Use with lateral dovetail profile insert tools and/or torque wrenches with 9 x 12 mm internal square drives. 

Square Drive b h S
mm mm mm
58290012 9 x 12 23.5 9.5 24
58290042 14 x 18 31.5 9.5 34.6

Warning: Refer to the manufacturers instructions for adjusting torque values.

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.


Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to:

>> Click here for more details <<

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252



1603 West Second Street
Pomona, CA 91766

Emergency Fabrication



Have a Question?