Menu Close

Stahlwille 7370/40 Adaptor (14x18)

Manufacturer: Stahlwille
Stahlwille 7370/40 Adaptor (14x18) Insert / Shell Tools • Output square drive in accordance with DIN 3120 • Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003 • In compliance with DIN EN ISO 6789:2003. The limits must not be exceeded if larger torque wrenches and tool holders are used. This product may also be referred to as the following: Stahlwille 7370/40 adaptor, 9x12 adaptor, 14x18 adaptor, stahlwille insert adaptor, 58270040
i h
Fabrication Time: 3-5 days


For use with Insert Tools with 9 x 12 mm outer square drive and/or on Torque Wenches with an internal square drive of 14 x 18 mm.

CODE Outer
  Square Drive 
Internal Square Drive b h S
mm mm mm
58290040 14 x 18 9 x 12 28 21 21.5

Warning: Refer to the manufacturers instructions

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.


Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to:

>> Click here for more details <<

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252



1603 West Second Street
Pomona, CA 91766

Emergency Fabrication



Have a Question?