Swaged Socket Assemblies

Swaged Socket Assemblies feature forged, steel fittings and develop the full, nominal wire rope breaking strength. All assemblies are proof tested and certified. Custom assemblies are available. Please note that stated Work Load Limits apply to 6 X 19 or 6 X 37 IWRC, EIP wire rope for sling and lifting applications. If Swaged Socket Assemblies are to be used for crane boom pendants or other applications, please contact us as the stated Work Load Limits do not apply.

When ordering you must specify:
1) Diameter

2) Stock Number

3) Pin Orientation [Pins Parallel or Pins at 90 Degrees].

SWAGED SOCKET DIMENSIONAL INFORMATION Rope Diameter (Inches) Open Socket (Dimensions in Inches) Closed Socket (Dimensions in Inches) N H D D H L 1/4" 1.47 .69 .69 .76 .50 3.50 5/16" 1.67 .80 .81 .88 .68 4.50 3/8" 1.67 .80 .81 .88 .68 4.50 7/16" 1.96 1.00 1.00 1.07 .87 5.75 1/2" 1.96 1.00 1.00 1.07 .87 5.75 9/16" 2.21 1.25 1.19 1.28 1.14 7.25 5/8" 2.21 1.25 1.19 1.28 1.14 7.25 3/4" 2.69 1.50 1.38 1.49 1.33 8.63 7/8" 3.20 1.75 1.63 1.73 1.53 10.09 1" 3.68 2.00 2.00 2.11 1.78 11.50 1-1/8" 4.18 2.25 2.25 2.37 2.03 12.75 1-1/4" 4.64 2.50 2.50 2.62 2.25 14.38 1-3/8" 5.25 2.41 2.50 2.62 2.29 15.75 1-1/2" 5.70 3.00 2.75 2.87 2.56 17 1-3/4" 6.67 3.50 3.50 3.63 3.08 20 2" 8.19 4.00 3.75 3.88 3.31 23

See 'Product Resources' directory above for Important Safety, Use and Inspection Information.
Larger sizes available. Stainless Steel assemblies available.

Rated capacity is based on 5:1 Design Factor.
Ton = 2000 Lbs.
Work Load Limits apply when Swage Assemblies are used for slings.
Work Load Limits do not apply when Swaged Assemblies are used for crane boom pendants.