Manufactured from treated, polyester webbing, Lift-It® Truck Tie Down Assemblies are available in 3 inch and 4 inch web widths. Truck Tie Down Assemblies are lighter than chain or cable binders and are much easier to use and store. Polyester webbing is low stretch (approximately 3% at Work Load Limit) and webbing strength is unaffected by moisture. All loose ends are heat seared to prevent fraying. All Lift-It® Truck Tie Down Assemblies meet or exceed federal (DOT), state (CHP) and Commercial Vehicle Safety Alliance (CVSA) regulations and guidelines.
Work Load Limits for Truck Tie Down Assemblies are a function of web and fitting strength and sewing efficiencies. Generally, 3 Inch Truck Tie Down Assemblies are assigned a 4,000 Lbs. Work Load Limit. 4 Inch Truck Tie Down Assemblies are generally rated at 5,000 Lbs. Work Load Limit.
 |
The CVSA regulations and guidelines allow permissible levels of damage to Tie Down Assemblies. Lift-It® and other responsible manufacturers stipulate ZERO TOLERANCE for damage. If Tie Down Assemblies of any width, used in any application exhibit damage as described on page 364, the Tie Down must not be used for any purpose.
|
|
|
FITTING and ACCESSORY INFORMATION |
|
See Pages 363-370 for Important Safety, Use and Inspection Information.
Dimensions are approximate and subject to change without notice.
|
All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.
Warning
See 'Product Resources' tab above for Warning Information
PROP 65 WARNING
Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov
>> Click here for more details <<