Tuff Bucket | Canvas - 125 lbs.

Tuff Buckets are load rated rigging buckets used for lifting, hoisting, and transporting tools, equipment, and work supplies to service locations at heights. As a pioneer in rigging & lifting buckets, Tuff Bucket recognizes the importance of safety.

Load Ratings - A Higher Standard -  

Tuff Bucket products are very different from typical lifting & carrying buckets. Each and every product Tuff Bucket manufactures is engineered and performance tested to withstand 500% of its upright rated capacity without exhibiting signs of stress or failure. The closable top of each Tuff Bucket is load rated to contain the buckets payload, in the event that the bucket is tipped, or is turned upside-down. When properly applied, the Tuff Bucket closure will withstand 200% of the buckets rated capacity while upside-down.

True American Craftsmanship -

Tuff Bucket believes that true American craftsmanship is not long gone, nor forgotten. Tuff Bucket products are manufactured right here in the USA. Our commitment to quality guarantees you will not find a higher quality or better built load-rated lifting bucket anywhere.

Load-Rated Design -

Tuff Bucket is committed to manufacturing a safe solution for overhead lifting. Each product design manufactured by Tuff Bucket is rigorously load tested to a design factor of 5:1 in the upright position, and 2:1 when upside down.

Serialized All-Weather Rigging Tag -

Each Tuff Bucket product bears an all-weather, serialized rigging tag that lists the product model, working load limits, material type of sling web used for rigging point / carry handle, with product use instruction and warnings.

Reinforced Bottom -

Each quality bucket starts with a structured bottom that will take the punishment of its payload every time.

Grommet Reinforced Attachments -

Tuff Bucket uses heavy duty grommets to reinforce the attachment of the Rigging Point / Carry Handle to the body of each bucket

Roll Down Closure -

The roll down canvas closure on each Tuff Bucket is equivalent to the rating of the upright capacity of the bucket. The load rating of the bucket closure is load rated at a design factor of 2:1.

Nylon Webbing -

Tuff Bucket uses 1” wide sling web spec webbing for all Rigging Points and Carry Handles.

Rigging Points / Carry Handles -

All Tuff Bucket primary Rigging Points / Carry Handles are manufactured of 1” sling webbing to ensure reliable control of the bucket.

Side Carry Handles -

Select Tuff Bucket items have two Side Carry Handles to assist in ground transport. These handles are not rated for rigging or overhead lifting, but makes lateral transportation very easy.

D Ring Rigging Eye -

All primary rigging points are equipped with a 1 ¼” steel rigging eye. This hardware meets the 5:1 design ratio incorporated into all Tuff Bucket products.

Structured Opening with Steel Rim -

Every round Tuff Bucket has a steel rim to provide strength and weight distribution

Triple Stitching -

All structural seams of each Tuff Bucket are triple stitched for increased strength and extra support.