FREE SHIPPING ON ORDERS OVER $499 *** ONLINE ORDERS ONLY *** (Some Products Excluded)
Menu
Search
Search store Close
Shopping cart Close

You have no items in your shopping cart.

Menu Close
Picture of 3" Wide Quad Leg - Eye & Eye Sling Bridle | 2 Ply Picture of 3" Wide Quad Leg - Eye & Eye Sling Bridle | 2 Ply Picture of 3" Wide Quad Leg - Eye & Eye Sling Bridle | 2 Ply Picture of 3" Wide Quad Leg - Eye & Eye Sling Bridle | 2 Ply

3" Wide Quad Leg - Eye & Eye Sling Bridle | 2 Ply

Manufacturer: Lift-It
(MLB4) Four Leg Bridle Assembly capacities are based on three legs carrying the assigned capacity. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
More...
SKU: MLB4-EE2903P
*
*
60° Horiz Angle WLL (Lbs) 23,000
45° Horiz Angle WLL (Lbs) 18,700
$0.00
i h
Fabrication Time: 8-11 days
Made in the USA

Lift-It® Bridle Assemblies feature combinations of links, fabric eyes and hooks for the efficient handling of loads with fixed lifting pointts. Synthetic Bridle Assemblies are lightweight and easy to handle when compared to wire and chain bridles.

Lift-It® Bridle Assemblies feature hardware that is substantially larger than other manufacturers. We take into account not only the strength requirements, but the spatial relationship between sling attachment points and interfacing hardware.

Lift-It® Bridle Assembly capacities are lower than our competitors. (MLB3) Three Leg Bridle Assembly capacities are based upon 2-1/2 legs carrying the assigned capacity. (MLB4) Four Leg Bridle Assembly capacities are based on three legs carrying the assigned capacity.

 

Lower capacities and more expensive, larger hardware will never allow us to be the successful, low bidder. Our conservative approach is respected by conscientious users and appreciated by sophisticated purchasers. In this instance, spending more for less provides for increased safety and longer sling service.

Masterlinks are welded. Forged (non-welded) masterlinks are available upon request. All hooks are supplied with latches. Bottom fittings are placed in the same plane as the top lifting fixture, unless otherwise specified. All fittings are alloy steel and other types of materials and attachments are available.

 

 

EYE & EYE

MULTI
LEG
BRIDLES

(MLB4)

 
      4E                 4L                 4W

Stock Number

Web Width

Sling

Type

Web Ply

Work Load Limits
(Lbs.)
Horizontal Angle

Top

Master

Link

(Dia.)

Master

Sub

Assembly

(Diameter)

BOTTOM ATTACHMENTS

Sling Weight** (Lbs.)

Minimum

Sling

Length

(Ft.)

Eye Dimensions W" X L" (Code "E")

Hoist

Hook

(Tons) (Code "W)

Bottom

Link Diameter (Code "L")

 

Base

8 Ft.

Adder

Per Ft.

MLB4-EE2901P

1"

EE

2

8,300

6,700

1-1/4"

1"

1" X 12"

1.5T*

1/2"

13.62

.45

4

MLB4-EE2902P

2"

EE

2

15,500

12,700

1-1/4"

1-1/4"

1" X 12"

3T*

5/8"

17.70

.88

5

MLB4-EE2903P

3"

EE

2

23,000

18,700

1-3/4"

1-1/4"

1-1/2" X 12"

5T*

3/4"

29.28

1.40

5

MLB4-EE2904P

4"

EE

2

29,600

24,100

2"

1-1/2"

1-1/2" X 14"

N/A

3/4"

54.00

1.76

8

MLB4-EE4903P

3"

EE

4

44,100

36,000

2"

2"

1-1/2 X 18"

N/A

1"

66.00

2.80

10

MLB4-EE4904P

4"

EE

4

59,200

48,300

2-1/2"

2-1/4"

2" X 18"

N/A

1"

115.00

3.50

10

* Web Hook available, specify order code "W"

**Bottom attachment weight must be added to base weight for total sling weight. Base (8ft) assembly weights and minimum lengths are based upon Masterlinks. Weights and minimum lengths for Master Sub Assemblies must be calculated.

 Available in either nylon or polyester webbing. Polyester comes standard on all models.
Polyester webbing is available in (9) heavy web class only.
For Polyester Max Edge™ webbing add letters
"PME" to Stock Number. (Example: MLB2-EE2902-PME-HH)

  

DO NOT EXCEED WORK LOAD LIMITS

Click Here for Attachment Specifications

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.
Warning See 'Product Resources' tab above for Warning Information

PROP 65 WARNING

Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

>> Click here for more details <<
Products specifications
Made in USAYes
Width (inches)3"
Ply2
60° Horiz Angle WLL (Lbs)23,000
45° Horiz Angle WLL (Lbs)18,700
Products specifications
Product Resources
Product ResourceProduct Spec How to Order
Product ResourceProduct Spec Attachment Specifications
Product ResourceProduct Spec Safety Bulletin-English
Product ResourceProduct Spec Safety Bulletin-Spanish

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252

Email

sales@lift-it.com

Address

1603 West Second Street
Pomona, CA 91766

Emergency Fabrication

909-524-9287

909-524-9204

Have a Question?

*
*
*
Customers who bought this item also bought
Picture of 3/4" Crosby® G-209 Screw Pin Anchor Shackle | 4.75 Ton

3/4" Crosby® G-209 Screw Pin Anchor Shackle | 4.75 Ton

1018491 - 3/4
G-209 / S-209
$53.30
Picture of Ratchet Tie Down Assemblies - 1,666 lbs. WLL

Ratchet Tie Down Assemblies - 1,666 lbs. WLL

2" x 30 FT.
Lift-It® Ratchet Tie Down Assemblies satisfy most transportation tie down requirements and feature a standard 18 inch fixed end. Other fixed end lengths, configurations and strengths are available. Lift-It® Ratchet Tie Down Assemblies are labeled to comply with CVSA guidelines, CHP Standards, North American Cargo Securement Standards, DOT regulations and WSTDA Recommended Standard Specifications.
Click for details
Picture of 2" Wide Eye & Eye Sling | 2 Ply | Heavy Duty

2" Wide Eye & Eye Sling | 2 Ply | Heavy Duty

EE2-902P
Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point unless otherwise specified. Eye & Eye nylon & polyester lifting slings featuring flat eyes can be used in all three hitches: choker, vertical and basket. Heavy duty nylon rigging slings featuring the Flat Eye and Eye design are made in widths ranging from as narrow as 1 inch and as wide as 12 inches. All Lift-It® Flat Eye & Eye slings feature protection at the sling eye bearing points. The extra protection wrapped around the sling eye provides additional service life as this is a critical wear area for all polyester and nylon rigging slings. Sling eyes are automatically tapered to a narrower width on Eye and Eye lifting slings that are over 3 inches in width. At Lift-It we do not charge extra to taper the eyes for your 2 inch wide rigging straps. Flat Eye, Eye and Eye nylon lifting slings used by crane and rigging customers around the world provide for the lowest profile eye available. Low profile eyes make sling removal easier when tight clearances are unavoidable. Nylon rigging slings that feature flat eyes are also referred to as double eye slings or Type 3 slings. If a more supple body composition is desired consider using Lift-It® polyester roundslings in the eye and eye style. Eye & Eye polyester round slings are formed by passing an exterior sleeve over the strands of the polyester roundsling. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*
$29.38
Picture of Actek® Hoist Ring | 5/8-11 Thread Size | 1.03" Thread Length | 4.000 Lbs. WLL

Actek® Hoist Ring | 5/8-11 Thread Size | 1.03" Thread Length | 4.000 Lbs. WLL

46004 - 5/8-11
All hoist rings are proof tested to 200% of work load limit, serialized for traceability, swivels 360° - pivots 180°, material: aircraft quality alloy (180,000 psi tensile strength, mininum)
$134.23
Picture of Actek® Swivel Hoist Ring | 1-8 Thread Size | 1.29" Thread Length | 10,000 Lbs. WLL

Actek® Swivel Hoist Ring | 1-8 Thread Size | 1.29" Thread Length | 10,000 Lbs. WLL

46210 - 1-8
All hoist rings are proof tested to 200% of work load limit, serialized for traceability, swivels 360° - pivots 180°, material: aircraft quality alloy (180,000 psi tensile strength, mininum)
$293.27
Lift-It
Information
My account
Customer service
CONTACT US
Copyright © 2026 Lift-It. All rights reserved. | Privacy Policy