FREE SHIPPING ON ORDERS OVER $499 *** ONLINE ORDERS ONLY *** (Some Products Excluded)
Search
Menu Close

3" Wide Quick Chap Cordura® Felt Sleeve | 1/4" Thick

Manufacturer: Lift-It
Lift-It® Felt Sleeves blend two wear protection materials: Polyester Felt covered by Bulked Nylon, chap sleeves.
More...
SKU: CHQS250-3
*
$44.20
i h
Made in the USA

Lift-It® Felt Chap Sleeves blend two wear protection materials: Polyester Felt covered by Bulked Nylon. Felt Sleeves provide protection from abrasion damage caused by contact with rough surfaces. Felt Sleeves can be made to fit any sling and are available in long lengths which can be cut into suitable sizes at the job site. Double or triple thickness Felt Sleeves are also available, depending upon the severity of the application. Quick Felt Sleeves are available with hook and loop tape, making installation and removal, quick and easy.

Always Specify Sleeve Length

See Product Resources for ordering information

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.

PROP 65 WARNING

Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

>> Click here for more details <<
Products specifications
Made in USAYes
Width (inches)3"
MaterialCordura®
Thickness1/4"
Products specifications
Product Resources
Product ResourceProduct Spec Sleeve Safety Information

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252

Email

sales@lift-it.com

Address

1603 West Second Street
Pomona, CA 91766

Emergency Fabrication

909-524-9287

909-524-9204

Have a Question?

*
*
*
Customers who bought this item also bought

1" Wide Endless Sling | 1 Ply | Heavy Duty

EN1-901P
One of the most versatile nylon web slings available, Endless slings can be rotated to provide an infinite number of contact points for the ends of the endless lifting strap and where the endless sling lift strap contacts the load. Endless hoisting slings and straps are for use in choker, vertical and basket hitches. Endless sling strap ends can be tapered and reinforced on request. Endless polyester and nylon sling straps are also referred to as continuous loop slings, type 5 slings and/or grommet slings. Lift-It® Endless slings are available in either nylon or polyester webbing, polyester is the standard material on all models. The length of an endless web sling is measured pull to pull or bearing to bearing on the ends of the endless nylon lift strap, not circumferentially. Polyester web and Nylon web endless slings are formed by overlapping the ends of the heavy duty webbing to form a load carrying splice. It is recommended when using endless sling straps that the load carrying splice NOT be placed into the load or lift connection points. Likewise, when Endless slings are used in a choker hitch it is recommended that the load carrying splice be placed above the choker point and below the lifting fixture. If an endless sling configuration is desired that does not feature a load carrying splice, we’d recommend the use of a polyester roundsling. Polyester round slings are also sometimes referred to as spansets. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*
$16.99

2.5" Wide CornerMax® Sleeves

CMSDF-2.5
CornerMax® Sleeves are an ideal solution to protect slings from cutting when it is not practical to use protection that is based upon full, 90º, corner contact.
*
$85.00

3" Wide Quick Bulked Nylon Sleeve | CQS-3

CQS-3
Sleeves cover both sides of the sling and can be moved to a specific location. Sleeves can also be re-positioned for quick and easy inspection of the sling.
*
$14.59

7/16" Helicopter Long Line - UHMPE

Helicopter Long Lines are Manufactured and Tagged to be ASME B30.9-Chapter 4 Compliant.
*

Primary Cover for 7/16" Helicopter Long Line

PRIMARY COVER FEATURES: • YKK® No. 10c Heavy Duty Marine Grade Zipper. • Circumferential Tie Wrap may assist in the prevention of premature zipper failure. • All covers feature tags, which include stock number and serial number for ease of identification and re-ordering. MATERIAL CHOICES: C = Cordura® Fabric CIV = Cordura® with Inner Vinyl FR = Fire Resistant PVC Vinyl (Heavy Duty) Color options vary with material choice.
*
Lift-It