Menu
Search
Search store Close
Shopping cart Close

You have no items in your shopping cart.

Menu Close
Picture of Bottom Support Drum Handling Sling Picture of Bottom Support Drum Handling Sling

Bottom Support Drum Handling Sling

Manufacturer: Lift-It
Lift-It® Bottom Support Drum Slings handle non-metallic drums and drums that cannot be transported at a minimum height.
More...
SKU: DS-BS
$839.20
i h
Fabrication Time: 8-11 days
Made in the USA

Lift-It® Bottom Support Drum Slings handle non-metallic drums and drums that cannot be transported at a minimum height.

 

Bottom Support Drum Slings feature a top bridle assembly and a bottom support. The top bridle assembly includes a MSA100 Masterlink with Subassemblies (1"Dia.) and is permanently attached to circumferential tightening bands. Stable control and secure handling are achieved by connecting the top bridle assembly to the bottom support at four points around the drum perimeter.

 

Bottom Support Drum Slings are designed for handling 55 gallon drums (22 inch dia. X 34 inch tall). Custom Drum Slings are readily available.

 

STOCK
NUMBER

Work Load Limit (Lbs.)

DS-BS

2000

 

Extra consideration should be given when handling partially filled drums to ensure load control.

 

 

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.
Warning See 'Product Resources' tab above for Warning Information

PROP 65 WARNING

Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

>> Click here for more details <<
Products specifications
Made in USA Yes
Products specifications
Product Resources
Product Resource Product Spec Lift Planning
Product Resource Product Spec Web Sling Inspection
Product Resource Product Spec Sling Hitches
Product Resource Product Spec Product Safety Bulletin-English
Product Resource Product Spec Product Safety Bulletin-Spanish

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252

Email

sales@lift-it.com

Address

1603 West Second Street
Pomona, CA 91766

Emergency Fabrication

909-524-9287

909-524-9204

Have a Question?

*
*
*
Customers who bought this item also bought
Picture of 2" Wide Single Leg - Eye & Eye Sling Bridle | 2 Ply

2" Wide Single Leg - Eye & Eye Sling Bridle | 2 Ply

SLB-EE2902P
Lift-It® Bridle Assemblies feature combinations of links, fabric eyes and hooks for the efficient handling of loads with fixed lifting points. Synthetic Bridle Assemblies are lightweight and easy to handle when compared to wire and chain bridles. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*
Click for details
Picture of Eye & Eye Slings

Eye & Eye Slings

Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point unless otherwise specified. Eye & Eye nylon & polyester lifting slings featuring flat eyes can be used in all three hitches: choker, vertical and basket. Heavy duty nylon rigging slings featuring the Flat Eye and Eye design are made in widths ranging from as narrow as 1 inch and as wide as 12 inches. All Lift-It® Flat Eye & Eye slings feature protection at the sling eye bearing points. The extra protection wrapped around the sling eye provides additional service life as this is a critical wear area for all polyester and nylon rigging slings. Sling eyes are automatically tapered to a narrower width on Eye and Eye lifting slings that are over 3 inches in width. At Lift-It we do not charge extra to taper the eyes for your 2 inch wide rigging straps. Flat Eye, Eye and Eye nylon lifting slings used by crane and rigging customers around the world provide for the lowest profile eye available. Low profile eyes make sling removal easier when tight clearances are unavoidable. Nylon rigging slings that feature flat eyes are also referred to as double eye slings or Type 3 slings. If a more supple body composition is desired consider using Lift-It® polyester roundslings in the eye and eye style. Eye & Eye polyester round slings are formed by passing an exterior sleeve over the strands of the polyester roundsling. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*
From $18.52
Picture of Cargo Nets

Cargo Nets

Web Cargo Nets are considerably more flexible, lightweight and compact than wire or manila rope nets. Military Specification Cargo Nets are manufactured to: Department of Defense specification-MIL-S-18313G and have a mesh opening size of approximately 6.25 inches square. Commercially produced Cargo Nets and non-standard sized nets are also readily available.
Click for details
Picture of 2" Wide Eye & Eye Sling | 4 Ply | Heavy Duty

2" Wide Eye & Eye Sling | 4 Ply | Heavy Duty

EE4-902P
Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point unless otherwise specified. Eye & Eye nylon & polyester lifting slings featuring flat eyes can be used in all three hitches: choker, vertical and basket. Heavy duty nylon rigging slings featuring the Flat Eye and Eye design are made in widths ranging from as narrow as 1 inch and as wide as 12 inches. All Lift-It® Flat Eye & Eye slings feature protection at the sling eye bearing points. The extra protection wrapped around the sling eye provides additional service life as this is a critical wear area for all polyester and nylon rigging slings. Sling eyes are automatically tapered to a narrower width on Eye and Eye lifting slings that are over 3 inches in width. At Lift-It we do not charge extra to taper the eyes for your 2 inch wide rigging straps. Flat Eye, Eye and Eye nylon lifting slings used by crane and rigging customers around the world provide for the lowest profile eye available. Low profile eyes make sling removal easier when tight clearances are unavoidable. Nylon rigging slings that feature flat eyes are also referred to as double eye slings or Type 3 slings. If a more supple body composition is desired consider using Lift-It® polyester roundslings in the eye and eye style. Eye & Eye polyester round slings are formed by passing an exterior sleeve over the strands of the polyester roundsling. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*
$57.61
Picture of CornerMax® Sleeves

CornerMax® Sleeves

CornerMax® Sleeves are an ideal solution to protect slings from cutting when it is not practical to use protection that is based upon full, 90º, corner contact.
*
From $85.00
Lift-It
Information
My account
Customer service
CONTACT US
Copyright © 2024 Lift-It. All rights reserved. | Privacy Policy