Crosby® Bolt Type Chain Shackle

• Capacities – 1/3 through 150 metric tons.
• Forged, Quenched and Tempered, with alloy pins.
• Work Load Limit permanently shown on every shackle.
• Hot Dip Galvanized (G) or Self Colored (S).
• Fatigue Rated (1/3 Ton through 55 Ton).
• Shackles 25 Ton and larger are RFID EQUIPPED.
• Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability not addressed by ASME B30.26.
• Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as: ABS, DNV, Lloyds or other certification. Charges for proof testing and certification are available when requested at the time of order.

Shackles 85 metric tons and larger can be provided as follows:
- Non Destructive Tested
- Serialized Pin and Bow
- Material Certification and or Chemical Certification
- must be requested at time of order.
• Look for the Red Pin®, it’s the mark of genuine Crosby quality.
• Type approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7 and ABS Guide for Certification of Cranes.

BOLT TYPE CHAIN SHACKLE SPECIFICATIONS Nominal Size (Inches) Work Load Limit (Tons) Stock Number Unit Weight (Lbs.) Dimensions (Inches) Tolerance + / - G-2150 S-2150 A B D F G K M P R G A 1/4 1/2 1019768 - .13 .47 .31 .25 .62 .91 1.59 .97 1.56 .25 .06 .06 5/16 3/4 1019770 - .23 .53 .38 .31 .75 1.07 1.91 1.15 1.82 .31 .06 .06 3/8 1 1019772 - .33 .66 .44 .38 .92 1.28 2.31 1.42 2.17 .38 .13 .06 7/16 1-1/2 1019774 - .49 .75 .50 .44 1.06 1.48 2.67 1.63 2.51 .44 .13 .06 1/2 2 1019775 1019784 .75 .81 .64 .50 1.18 1.66 3.03 1.81 2.80 .50 .13 .06 5/8 3-1/4 1019793 1019800 1.47 1.06 .77 .63 1.50 2.04 3.76 2.32 3.56 .63 .13 .06 3/4 4-3/4 1019819 1019828 2.52 1.25 .89 .75 1.81 2.40 4.53 2.75 4.15 .81 .25 .06 7/8 6-1/2 1019837 1019846 3.85 1.44 1.02 .88 2.10 2.86 5.33 3.20 4.82 .97 .25 .06 1 8-1/2 1019855 1019864 5.55 1.69 1.15 1 2.38 3.24 5.94 3.69 5.39 1 .25 .06 1-1/8 9-1/2 1019873 1019882 7.60 1.81 1.25 1.13 2.68 3.61 6.78 4.07 5.90 1.25 .25 .06 1-1/4 12 1019891 1019908 10.81 2.03 1.40 1.25 3 3.97 7.50 4.53 6.69 1.38 .25 .06 1-3/8 13-1/2 1019917 1019926 13.75 2.25 1.53 1.38 3.31 4.43 8.28 5.01 7.21 1.50 .25 .13 1-1/2 17 1019935 1019944 18.50 2.38 1.66 1.50 3.62 4.87 9.05 5.38 7.73 1.62 .25 .13 1-3/4 25 1019953 1019962 31.40 2.88 2.04 1.75 4.19 5.82 10.97 6.38 9.33 2.12 .25 .13 2 35 1019971 1019980 46.75 3.25 2.30 2.10 5 6.82 12.74 7.25 10.41 2.36 .25 .13 2-1/2 55 1019999 1020004 85 4.12 2.80 2.63 5.68 8.07 14.85 9.38 13.58 2.63 .25 .25 3 † 85 1020013 - 124.25 5 3.25 3 6.50 8.56 16.87 11 15.13 3.50 .25 .25
*Note: Maximum Proof Load is 2 Times Work Load Limit. Minimum Ultimate Strength is 6 times Work Load Limit. † Individually proof tested with certification. ‡ Furnished in Anchor style only and furnished with Round Head bolts with welded handles. For Work Load Limit reduction due to side loading, see "Shackle Warning Information" in above Product Resources link.