Search
Menu Close

Crosby

Display per page

Crosby® Alloy Bolt Type Shackle

G-2140 / S-2140
G-2140 / S-2140
Made in the USA

Crosby® Alloy Masterlink- A-342

Alloy Steel, Quenched and Tempered
Made in the USA

Crosby® Alloy Screw Pin Anchor Shackle

G 209 A
G-209 A
Made in the USA

Crosby® Bolt Type Anchor Shackle

G-2130 / S-2130
G-2130 / S-2130
Made in the USA

Crosby® Bolt Type Chain Shackle

G-2150 / S-2150
G-2150 / S-2150
Made in the USA

Crosby® Eye & Eye Turnbuckle - HG-226

HG-226
End fittings are Quenched and Tempered; bodies are heat treated by normalizing. Hot Dip galvanized steel. Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckle sizes 1/4” through 2-1/2” a shackle one size smaller can be reeved through eye.
Made in the USA

Crosby® Eye Chain Hook W/ Integrated Latch-S315A

S-315A
Forged Alloy Steel, Quenched and Tempered. Individually Proof Tested to 2-1/2 times Work Load Limit with certification.
Made in the USA

Crosby® Eye Foundry Hook - A329

A329
Alloy Steel, Quenched and Tempered. Individually Proof Tested to 2-1/2 times Work Load Limit with certification.
Made in the USA

Crosby® Eye Grab Hook - A328

A328
Alloy Steel, Quenched and Tempered. Individually Proof Tested to 2-1/2 times Work Load Limit with certification.
Made in the USA

Crosby® Eye Hook - S-320 / S-320N

S-320 / S-320N
Available in carbon steel and alloy steel. Design Factor for Carbon Steel - 5 to 1. Design Factor for Alloy Steel- 4 to 1. Eye hooks are load rated.
Made in the USA

Crosby® G-209 Screw Pin Anchor Shackle

G-209 / S-209
G-209 / S-209
Made in the USA

Crosby® G-277 Forged Shoulder Nut Eye Bolts

G-277
Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull.
Made in the USA

Crosby® Hook & Hook Turnbuckles - HG-223

HG-223
Meets the performance requirements of Federal Specifications FF-T-791b, Type 1, Form 1 - CLASS 5, and ASTM F-1145, except for those provisions required of the contractor.
Made in the USA

Crosby® Hook End Fitting Specifications - HG-4037

HG-4037
Quenched and Tempered. Hot Dip galvanized steel. Hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigue properties.
Made in the USA

Crosby® Jaw & Jaw Turnbuckle - HG-228

HG-228
End fittings are Quenched and Tempered; bodies are heat treated by normalizing. Hot Dip alvanized steel. Forged jaw ends are fitted with bolts and nuts for 1/4” through 5/8” and pins with cotters for 3/4” through 2-3/4” sizes. Modified UNJ thread on end fittings for improved fatigue properties.
Made in the USA

Crosby® Lok-A-Loy® Alloy Connecting Link

A-1337
Suitable for use with both Grade 80 and Grade 100 chain. Individually Proof Tested to 2-1/2 times Work Load Limit with certification. Locking system that provides for simple assembly and disassembly - no special tools needed.
Made in the USA

Crosby® M-279 Forged Machinery Shoulder Nut Eye Bolts - Metric

M-279
Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull. For angle loading,
Made in the USA

Crosby® Round Pin Anchor Shackle

G-213 / S 213
G-213 / S-213
Made in the USA

Crosby® Round Pin Chain Shackle

G-215 / S-215
G-215 / S-215
Made in the USA

Crosby® S-279 Forged Machinery Shoulder Nut Eye Bolts

S-279
Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull. For angle loading,
Made in the USA

Crosby® Screw Pin “Wide Body” Shackle

G-2169 / S-2169
G-2169 / S-2169
Made in the USA

Crosby® Screw Pin Chain Shackle

G-210 / S-210
G-210 / S-210
Made in the USA

Crosby® Shur-Lock® Hooks - S1316

S-1316
Forged Alloy Steel, Quenched and Tempered.
Made in the USA

Crosby® Swivel Hooks - S-322CN / S-322AN

S322CN / S322AN
Forged, Quenched and Tempered Load Rated
Made in the USA

Crosby® Theatrical Shackle

S-209T
S-209T
Made in the USA

Crosby® Web Sling Hook - WS-320

WS-320
The web sling hook eye is designed with a wide beam surface to eliminate bunching effects. Web Sling Hooks are supplied with latches.
Made in the USA

Crosby® Web Sling Shackle

S-281
S-281 Designed to connect web and roundslings to eyebolts and lifting lugs.
Made in the USA

Crosby® Wide Body Shackle

G-2160 / S-2160
G-2160 / S-2160
Made in the USA

Eye End Fitting Specifications - HG-4037

HG-4037
Quenched and Tempered. Hot Dip galvanized steel. Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckle sizes 1/4” through 2-1/2”, a shackle one size smaller can be reeved through eye. Modified UNJ thread for improved fatigue properties. Fatigue Rated.
Made in the USA

High Performance Sling Connector - S-237

S-237
S237 High Performance Sling Connectors are designed to easily connect HP slings to masterlinks or eye hooks for the creation of bridle assemblies. The Metal-on-Metal “hinge point” enables increased sling longevity and efficiency.
Made in the USA

High Performance Sling Connector - S-238

S-238
High Performance Sling Connectors allow slings to be joined together.
Made in the USA

Jaw End Fitting Specifications - HG-4037

HG-4037
Quenched and Tempered. Hot Dip galvanized steel. Forged jaw ends are fitted with bolts and nuts on sizes 1/4” through 5/8” and pins with cotters on sizes 3/4” through 2-3/4”. Modified UNJ thread for improved fatigue properties. Fatigue Rated.
Made in the USA

S-255 Spool

Spools are designed to keep the load centered on the pin, keeping the sling positioned correctly in the shackle bow.
Made in the USA

S-256 Link Plate

1020
Link Plates are designed to connect two Sling Saver Shackles together.
Made in the USA

Single Leg Sling

Single leg slings. S237 and S238 High Performance Sling Connectors are designed to easily adapt to other Crosby fittings to develop complete systems for High Performance Slings.
Made in the USA

Sliding Choker Hook - S287

S287
Designed to reduce friction, abrasion and fraying in the area of choke. Replacement spools and covers are available.
Made in the USA

Sling Saver Shackle - Double Leg System

Synthetic Sling Saver Shackles were designed to easily adapt Crosby® sling fittings into the construction of complete rigging assemblies for synthetic slings.
Made in the USA

Sling Saver Shackle - Single Leg System

Synthetic Sling Saver Shackles were designed to easily adapt Crosby® sling fittings into the construction of complete rigging assemblies for synthetic slings.
Made in the USA

Synthetic Sling Saver Shackles

S-252 / S253
S-252 / S-253 Eliminates "bunching" effect caused by traditional shackles. Increased bow radius allows better load distribution on internal fibers
Made in the USA

Turnbuckle Body Only Specifications - HG-2510

HG-2510
Quenched and Tempered. Hot Dip galvanized steel. UNC threads. Fatigue Rated. Meets the performance requirements of Federal Specifications FF-T-791b, Type 1, Form 1 - Class 2, except for those provisions required by the contractor.
Made in the USA

Web Sling Connector - S-280

S-280
Designed to connect synthetic web slings to conventional Crosby® hardware: 320N Eye Hooks, Masterlinks, Rings and Shackles.
Made in the USA
Shop By Category
Shop By Manufacturer
Lift-It