FREE SHIPPING ON ORDERS OVER $499 *** ONLINE ORDERS ONLY *** (Some Products Excluded)
Search
Menu Close

5/16" MG GrabiQ® Master Grab Single Leg Chain Sling

Manufacturer: GrabiQ
All in one fitting, combining masterlink, connector and shortening function for single leg slings. Includes MG Top Link.
More...
SKU: MG-8-10
*
*
WLL (Lbs) 5,700
$0.00
i h
Fabrication Time: 8-11 days

All in one fitting, combining masterlink, connector and shortening function for single leg slings.

  • Heat Number identification for product traceability.
  • Integral Chain Pockets permit shortening or creating leg loops for each leg.
  • REACH: Length, iancluding attachments, measured from bearing point to bearing point.

  • All chain slings come standard with a 200% load test

 

All in one fitting, combining masterlink, connector and shortening function for single leg slings.

MASTER GRAB TYPE - MG

Stock

Number

 

CHAIN
SIZE
(Inches)

WORK
LOAD LIMIT
(Lbs.)

DIMENSIONS
(Inches)

WEIGHT
EACH
(Lbs.)

L

A

B

H

MG-8-10

5/16

5,700

6.7

3.7

2.4

.71

2.2

MG-10-10

3/8

8,800

8.3

4.6

3

.87

4.0

MG-13-10

1/2

15,000

10.3

5.6

3.5

1

7.7

MG-16-10

5/8

22,600

12.2

6.4

4.1

1.2

12.8

*Design Factor 4:1

  Refer to "Product Resources" for Important Safety, Use and Inspection Information.

 

EGKN SLING HOOK

Stock Number

 

CHAIN SIZE (Inches)

WORK LOAD LIMIT (Lbs.) AT 90°

DIMENSIONS (Inches)

WEIGHT EACH (Lbs.)

L

B

G

H

EGKN-8-10

5/16

5,700

3.7

1.1

.67

.87

1.1

EGKN-10-10

3/8

8,800

4.8

1.4

.90

1.2

2.2

EGKN-13-10

1/2

15,000

5.7

1.7

1.1

1.5

5.1

EGKN-16-10

5/8

22,600

6.7

2.0

1.4

1.8

8.4

*Design Factor 4:1

 

GBK SELF LOCKING HOOK

Stock Number

 

CHAIN SIZE (Inches)

WORK LOAD LIMIT (Lbs.) AT 90°

DIMENSIONS (Inches)

WEIGHT EACH (Lbs.)

L

B

G

H

GBK-8-10

5/16

5,700

4.7

1.5

.79

.87

1.8

GBK-10-10

3/8

8,800

5.9

1.9

.94

1.1

2.9

GBK-13-10

1/2

15,000

6.8

2.1

1.1

1.4

5.3

GBK-16-10

5/8

22,600

8.5

2.4

1.5

2.0

12.3

*Design Factor 4:1

 

LKBK SWIVEL EYE GRIP LATCH SELF LOCKING HOOK with Ball Bearings

Stock Number

 

CHAIN SIZE (Inches)

WORK LOAD LIMIT (Lbs.) AT 90°

DIMENSIONS (Inches)

WEIGHT EACH (Lbs.)

L

B

C

E

F

G

H

LKBK-7/8-10

5/16

5,700

6.9

1.5

1.1

1.5

.47

.79

.87

1.8

LKBK-10-10

3/8

8,800

8.4

1.9

1.4

1.7

.59

.87

1.1

4.0

LKBK-13-10

1/2

15,000

9.3

2.1

1.9

1.9

.75

1.10

1.4

8.4

*Design Factor 4:1

 

CLEVIS GRAB HOOKS (CRADLE TYPE) - GG

STOCK NUMBER

 

CHAIN

SIZE

(Inches)

GRADE

WORK LOAD

LIMIT (Lbs.)*

DIMENSIONS

(Inches)

WEIGHT EACH (Lbs.)

L

B

GG-7-10

9/32

100

4,300

2.2

.39

.66

GG-8-10

5/16

100

5,700

2.2

.41

.88

GG-10-10

3/8

100

8,800

3.3

.47

2

GG-13-10

1/2

100

15,000

3.8

.63

4

GG-16-10

5/8

100

22,600

4.9

.79

6.8

GG-20-10

3/4

100

35,300

5.8

1

15.4

*Design Factor 4:1  

 

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.

PROP 65 WARNING

Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

>> Click here for more details <<
Products specifications
Chain Size5/16"
WLL (Lbs)5,700
Products specifications
Product Resources
Product ResourceProduct Spec Safety Bulletin-English
Product ResourceProduct Spec Safety Bulletin-Spanish
Product ResourceProduct Spec Safety Bulletin-English
Product ResourceProduct Spec Safety Bulletin-Spanish

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252

Email

sales@lift-it.com

Address

1603 West Second Street
Pomona, CA 91766

Emergency Fabrication

909-524-9287

909-524-9204

Have a Question?

*
*
*
Customers who bought this item also bought

2 3/4" Wide Endless Round Sling | Yellow

RS90 - Yellow
Polyester endless round slings from Lift-It Manufacturing. Endless round sling configurations enable the user to rotate hook and load contact points, resulting in increased sling longevity. Lift-It® Polyester Roundslings are made of polyester core yarn covered by a seamless, tubular cover. The seamless round sling construction and tubular design of the cover helps to eliminate the premature rupturing of covers, characteristic of seamed roundslings. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*
$30.16

1" Wide Eye & Eye Sling | 2 Ply | Heavy Duty

EE2-901P
Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point unless otherwise specified. Eye & Eye nylon & polyester lifting slings featuring flat eyes can be used in all three hitches: choker, vertical and basket. Heavy duty nylon rigging slings featuring the Flat Eye and Eye design are made in widths ranging from as narrow as 1 inch and as wide as 12 inches. All Lift-It® Flat Eye & Eye slings feature protection at the sling eye bearing points. The extra protection wrapped around the sling eye provides additional service life as this is a critical wear area for all polyester and nylon rigging slings. Sling eyes are automatically tapered to a narrower width on Eye and Eye lifting slings that are over 3 inches in width. At Lift-It we do not charge extra to taper the eyes for your 2 inch wide rigging straps. Flat Eye, Eye and Eye nylon lifting slings used by crane and rigging customers around the world provide for the lowest profile eye available. Low profile eyes make sling removal easier when tight clearances are unavoidable. Nylon rigging slings that feature flat eyes are also referred to as double eye slings or Type 3 slings. If a more supple body composition is desired consider using Lift-It® polyester roundslings in the eye and eye style. Eye & Eye polyester round slings are formed by passing an exterior sleeve over the strands of the polyester roundsling. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*
$23.40

2" Wide Eye & Eye Sling | 1 Ply | Heavy Duty

EE1-902P
Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point unless otherwise specified. Eye & Eye nylon & polyester lifting slings featuring flat eyes can be used in all three hitches: choker, vertical and basket. Heavy duty nylon rigging slings featuring the Flat Eye and Eye design are made in widths ranging from as narrow as 1 inch and as wide as 12 inches. All Lift-It® Flat Eye & Eye slings feature protection at the sling eye bearing points. The extra protection wrapped around the sling eye provides additional service life as this is a critical wear area for all polyester and nylon rigging slings. Sling eyes are automatically tapered to a narrower width on Eye and Eye lifting slings that are over 3 inches in width. At Lift-It we do not charge extra to taper the eyes for your 2 inch wide rigging straps. Flat Eye, Eye and Eye nylon lifting slings used by crane and rigging customers around the world provide for the lowest profile eye available. Low profile eyes make sling removal easier when tight clearances are unavoidable. Nylon rigging slings that feature flat eyes are also referred to as double eye slings or Type 3 slings. If a more supple body composition is desired consider using Lift-It® polyester roundslings in the eye and eye style. Eye & Eye polyester round slings are formed by passing an exterior sleeve over the strands of the polyester roundsling. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*
$30.15

1" Wide Endless Sling | 2 Ply | Heavy Duty

EN2-901P
One of the most versatile nylon web slings available, Endless slings can be rotated to provide an infinite number of contact points for the ends of the endless lifting strap and where the endless sling lift strap contacts the load. Endless hoisting slings and straps are for use in choker, vertical and basket hitches. Endless sling strap ends can be tapered and reinforced on request. Endless polyester and nylon sling straps are also referred to as continuous loop slings, type 5 slings and/or grommet slings. Lift-It® Endless slings are available in either nylon or polyester webbing, polyester is the standard material on all models. The length of an endless web sling is measured pull to pull or bearing to bearing on the ends of the endless nylon lift strap, not circumferentially. Polyester web and Nylon web endless slings are formed by overlapping the ends of the heavy duty webbing to form a load carrying splice. It is recommended when using endless sling straps that the load carrying splice NOT be placed into the load or lift connection points. Likewise, when Endless slings are used in a choker hitch it is recommended that the load carrying splice be placed above the choker point and below the lifting fixture. If an endless sling configuration is desired that does not feature a load carrying splice, we’d recommend the use of a polyester roundsling. Polyester round slings are also sometimes referred to as spansets. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*
$20.84

5/16" MGD GrabiQ® Master Grab Double Leg Chain Sling

MGD-8-10
All in one fitting, combining masterlink, connector and shortening function for two leg slings. Includes MGD Top Link. SKU: MGD
*
Lift-It