Close
(0) items
You have no items in your shopping cart.
Shop All Products
    Filters
    Preferences
    Search

    Caldwell

    Display per page

    Adjustable Bail Beam - M24

    Handles off center loads by adjusting bail before lift. Adjustment of bail within range. Swivel hooks with hook latches standard. Wide range of sizes and capacities available. Complies with ASME standards.

    Adjustable Container Lifting Assemblies

    Lift-It® Container Lifting Assemblies provide efficiency in handling containers featuring a bottom lifting slot. Adjustable Container Lifting Assemblies are used when the center of gravity is offset and not located at the center of the container.

    Adjustable Double Ended Monorail Clamp

    Clamp ends are one piece, fully adjustable. No tools required. Positive grip, left/right threaded adjusting bar. “A” Series Models allow for minor height adjustment. Ideal for erection of permanent or temporary overhead runways.

    Adjustable Spreader / Lifting Beam - M16

    Adjustable lifting points. Handles both wide and unbalanced loads. Low headroom capability. Shackles included. Converts to Spreader Beam with the addition of top rigging. Optional swivel hooks are available. Complies with ASME Standards. PRODUCT OPTIONS: OPTION “C” – Chain Top Rigging OPTION “S” – Pair of Swivel Hooks

    Adjustable Spreader Beam - M32

    Ideal where headroom is not limited. Adds stability to the lift. Telescoping spread is standard. Available with standard chain or wire rope rigging. (You must specify Top Rigging). Available with Adjust-A-Leg® rigging for off center loads. (Minimum lifting capacity will be 10-15% of beam capacity). Swivel hooks with hook latch. Wide range of additional sizes and capacities available. Complies with ASME Standards.

    Adjust-A-Leg® Four Point Lift - Model AL4

    Allows crane hook to be over the load’s center of gravity in unbalanced or non-symmetrical four point lifts. Quickly adjusts to the center of gravity. Can be locked into place for constant lifts. Can be used in conjunction with box type spreader beams. Ideal for use in rigging applications and machinery moving.

    Adjust-A-Leg® Two Point Lift - Model AL2

    Allows crane hook to be over the load’s center of gravity in unbalanced or non-symmetrical two point lifts. Quickly adjusts to the center of gravity. Can be locked into place for constant lifts. Can be used in conjunction with spreader beams. Ideal for use in rigging applications and machinery moving. Complies with ASME standards.

    Barrier Grabs - Model 74

    Special Auto-Latch mechanism makes operation hands free. No need to latch or secure lifting chains or slings. Barriers incur far less damage resulting in longer life and reduced costs. Barrier Grab moves barriers quicker and easier than manual methods, resulting in less labor.

    Beam Tongs - Model BT

    Tong provided with lifting shackle. Load must be balanced and controlled when lifting. Use only for vertical lifting. For added stability when handling longer loads, use in pairs with a spreader bar. Complies with ASME Standards.

    Concrete Manhole Housing Lifter - MHL

    Handles concrete pipe efficiently without damage to concrete seats. Legs can be quickly positioned to safely balance the load. 2 or 3 leg models available. Handles 4 to 6 inch concrete wall thickness. Requires constant tension to maintain positive load contact. Other housing configurations are available. Complies with ASME Standards.

    Container Lifting Lugs

    Lift-It® Container Lifting Assemblies provide efficiency in handling containers featuring a bottom lifting slot. Container Lifting Lugs: An efficient way to lift containers from bottom lifting slot and handle indicator shows Lug is engaged for lifting.

    Fixed Container Lifting Assemblies

    Lift-It® Container Lifting Assemblies provide efficiency in handling containers featuring a bottom lifting slot. Fixed Container Lifting Assemblies are used when the center of gravity is located at the center of the container.

    Fixed Spreader Beam - M30

    Ideal where headroom is not limited. Adds stability to the lift. Available with standard chain or wire rope rigging. (You must specify Top Rigging). Available with Adjust-A-Leg® rigging for off center loads. (Minimum lifting capacity will be 10-15% of beam capacity). Swivel hook with hook latch. Wide range of additional sizes and capacities available. Complies with ASME Standards.

    Four Point Beam

    Four Point Lifting Beams handle large loads using multiple pick points. Each unit is designed for your specific application and complies with ASME standards.

    Heavy Duty Adjustable Pallet Lifter - M96

    Forged Forks provide for ease of handling. Forged Forks provide smaller fork size. Double Frame design for increased capacity. Complies with ASME Standards.

    Heavy Duty C-Hook - M82

    Designed for heavy duty applications. High tensile alloy steel plate reduces physical size and weight. Counter balanced to hang level when empty. Inside radius helps to prevent coil damage. Curved coil saddle is standard. Guide Handles for ease of hook positioning. Versatile: Handles a wide range of coil widths. Other sizes and capacities are available. Available with optional padding for additional coil protection. Complies with ASME standards.

    Heavy Duty Coil Upender - M88

    Fast and convenient way to manipulate coils. Heavy duty disc brake will stop load in any position. Reversing Magnetic Starter with 115 volt pendant control. Stop travel/over travel limit switches. PRODUCT OPTIONS: Larger platforms, sizes and capacities are available. V-Block can be furnished standard or urethane faced. 180 degree horizontal rotation for use from same side. Fork lift truck pick up pockets. Note: If load is not a coil, specify the load’s center of gravity.

    Heavy Duty Sheet Lifters - Model 60

    Versatile handling of bundles, sheets, plates and other materials stacked horizontally. Low headroom design for optimum lifting capabilities.

    Heavy Duty Twin Basket Beam - M22

    Designed to be used with slings in a basket hitch. Specially designed hooks with hook latches minimize potential sling damage. Two sets of fixed hooks are standard for all lengths over 4’. The inner set of hooks (S2) are 1/2 the overall spread. Extra spreads available upon request. Complies with ASME standards. Model No. M22G made specifically for handling sheets or ackages of glass, wood or wood crates.

    Low Headroom Multiple Spread Beam - M20 / M20H

    Ideal where headroom is limited. 3’ and 4’ beams have 2 spreads. Beams over 4’ have 3 spreads. Swivel hooks with hook latches standard. Wide range of sizes and capacities available. Complies with ASME Standards. Spreads to adjust the load are: • Outside Spread; Middle spread (outside spread less 1’); Inside spread (outside spread less 2’).

    Magnetic Manhole Lifter - MML

    Moving heavy manhole covers becomes a one person operation, reducing potential for injuries on the job. Dolly Handle breaks down for easy storage. Use for covers or grates. Models available to accomodate a variety of lid sizes

    Manhole Sleeve Lifter - MCL

    Quick and efficient way to place cast manhole sleeves. Easily attaches to and releases from the load. 2 or 3 leg models available. Contact us for other frame configurations. Magnetic Manhole Cover Lifters are available. Complies with ASME Standards

    Motorized Load Leveling Beam

    Motorized Load Leveling Beam adjusts to center of gravity during the lift. Swivel hooks with hook latch are standard. Custom Sizes are available. Push button pendent control with radio control option. Standard bail adjustment 6” each side of center, with optional 12” adjustment each side of center available. Complies with ASME Standards. Shown with special swivel bearing load hooks..

    Pallet Puller - Model MPP

    Used for moving hard to reach loaded pallets on flat surfaces, such as truck trailers or loading docks. Extends reach capability of fork lift trucks. Single scissor action. Heavy duty steel design. NOT FOR OVERHEAD LIFTING. Work Load Limit- 1250 Lbs. 3/8 in. proof coil chain.

    Pipe Grabs - Model C & S

    Heavy duty, automatic clamping design. Outriggers stabilize pipe, during the lift. No blocking is required. The operator only has to guide the clamp into place.

    Rail Tongs - Model RLT

    Designed to handle standard size rails. Tongs are provided with non-slip, machined, diamond face gribbing pads. Load must be balanced and controlled when lifting. Complies with ASME standards.

    Single Fork Hook - Model 5

    Easy attachment, no special wrenches or tools needed. Strong, sturdy, all welded construction. Easy to see, highly visible, yellow paint. Fixed or Swivel Hooks available. Custom designs available.

    Single Hook Beam - Model 10

    Easy attachment, no special wrenches or tools needed. Strong, sturdy, all welded construction. Easy to see, highly visible, yellow paint. Fixed or Swivel Hooks available. Custom designs available. Model 10 & 15 available on request.

    Standard Fixed Pallet Lifter - M90

    Converts overhead crane to lift truck. Counter balanced to hang level when empty. Facilitates loading/unloading in inaccessible areas. Larger capacity models are available. Complies with ASME Standards.

    Three Point Beam

    Three Point Lifting Beams handle large loads using multiple pick points. Each unit is designed for your specific application and complies with ASME standards.

    Top Adjuster Mechanism

    Lift-It® Container Lifting Assemblies provide efficiency in handling containers featuring a bottom lifting slot. Top Adjuster Mechanism Allows the crane hook to be placed directly over the Center of Gravity; Quickly adjusts to the CG; Can be locked into place for repetitive lifts.

    Twin Hoist Beam - M25

    Use two or more hoists to increase lifting capacity. Swivel hook with hook latch. Several options are available for added versatility.

    Caldwell