Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Two Leg Bridle - Roundsling (MLB2)

    Call for price
    *
    *
    *

    Lift-It® Polyester Roundsling Bridle Assemblies feature sling and hardware combinations for the efficient handling of loads with fixed lifting points. Polyester Roundsling Bridle Assemblies are lightweight and easy to handle when compared to wire rope and chain bridles. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

    Fabrication Time: 1 week

    Lift-It® Polyester Roundsling Bridle Assemblies feature sling and hardware combinations for the efficient handling of loads with fixed lifting points. Polyester Roundsling Bridle Assemblies are lightweight and easy to handle when compared to wire rope and chain bridles.

    Lift-It® Polyester Roundsling Bridle Assemblies feature hardware that is substantially larger than other manufacturers. We take into account not only the strength requirements, but the spatial relationship between sling attachment points and interfacing hardware.

    Lift-It® Polyester Roundsling Bridle Assembly capacities are lower than our competitors. (MLB3) Three Leg Bridle Assembly capacities are based upon 2-1/2 legs carrying the assigned capacity. (MLB4) Four Leg Bridle Assembly capacities are based on three legs carrying the assigned capacity.

    Lower capacities and more expensive, larger hardware will never allow us to be the successful, low bidder. Our conservative approach is respected by conscientious users and appreciated by sophisticated purchasers. In this instance, spending more for less provides for increased safety and longer sling service.

    Masterlinks are welded. Forged (non-welded) masterlinks are available upon request. All hooks are supplied with latches. All fittings are alloy steel and other types of materials and attachments are available. Hardware specifications can be found on the folowing: Masterlink (With Flat), Masterlinks With Subassemblies (And Flats), Eye Hooks and Swival Hooks.

    Endless bridle slings allow for sling rotation. Do not place the sling tag in a contact point with bridle masterlink or fittings.
     

     Work Load Limits for Multi-Leg Bridle Assemblies are based on the following conditions:

    1. Even load weight distribution on all legs.
    2. The bridle legs being same length. If the legs are not sharing the load equally, the assembly design factor is reduced.
    3. All bridle legs used at the same horizontal angle.

    If the conditions of the lift vary from those above, Work Load Limits must be recalculated.


    TWO LEG BRIDLE (MLB2) SPECIFICATIONS

    STOCK
    NUMBER

    COLOR CODE

    Assembly Work Load (Lbs.) Horizontal Angle

    MINIMUM

    LENGTH

    (Bearing)

    TOP FITTING

    BOTTOM FITTINGS

    MASTER

    LINK

    (Diameter)

    MASTER

    W/ SUB-ASSYS.

    (Diameter)

    MASTER

    LINK

    (Diameter)

    ALLOY

    HOOK SIZE

    (Tons)

    60°

    45°

    MLB2-RS30

    PURPLE

    4,500

    3,700

    4 ft.

    3/4"

    3/4"

    1/2"

    1.5 T

    MLB2-RS60

    GREEN

    9,100

    7,400

    4 ft.

    7/8"

    1"

    5/8"

    3 T

    MLB2-RS90

    YELLOW

    14,500

    11,800

    4 ft.

    1"

    1-1/4"

    3/4"

    5 T

    MLB2-RS120

    TAN

    18,300

    12,900

    4 ft.

    1-1/4"

    1-1/2"

    7/8"

    5 T

    MLB2-RS150

    RED

    22,800

    18,600

    4 ft.

    1-1/2"

    1-1/2"

    1"

    N/A

    MLB2-RS180

    WHITE

    29,000

    20,500

    6 ft.

    1-3/4"

    2"

    1-1/4"

    N/A

    MLB2-RS240

    BLUE

    36,700

    29,900

    6 ft.

    1-3/4"

    2"

    1-1/2"

    N/A

    MLB2-RS360DC

    GRAY

    53,600

    43,800

    8 ft.

    2"

    2-1/4"

    1-3/4"

    N/A

    *Available in Web Sling Hook design- Specify order code “W”

     

     Can fail if damaged, misused or overloaded. Inspect before use. Use by untrained personnel is hazardous. OBSERVE AND DO NOT EXCEED WORK LOAD LIMIT. DEATH and INJURY can occur from improper use or maintenance.

    All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.
    Products specifications
    Product Resources Usage Information
    Product Resources Safety Bulletin-English
    Product Resources Safety Bulletin-Spanish

    Lift-It® Polyester Roundsling Bridle Assemblies feature sling and hardware combinations for the efficient handling of loads with fixed lifting points. Polyester Roundsling Bridle Assemblies are lightweight and easy to handle when compared to wire rope and chain bridles.

    Lift-It® Polyester Roundsling Bridle Assemblies feature hardware that is substantially larger than other manufacturers. We take into account not only the strength requirements, but the spatial relationship between sling attachment points and interfacing hardware.

    Lift-It® Polyester Roundsling Bridle Assembly capacities are lower than our competitors. (MLB3) Three Leg Bridle Assembly capacities are based upon 2-1/2 legs carrying the assigned capacity. (MLB4) Four Leg Bridle Assembly capacities are based on three legs carrying the assigned capacity.

    Lower capacities and more expensive, larger hardware will never allow us to be the successful, low bidder. Our conservative approach is respected by conscientious users and appreciated by sophisticated purchasers. In this instance, spending more for less provides for increased safety and longer sling service.

    Masterlinks are welded. Forged (non-welded) masterlinks are available upon request. All hooks are supplied with latches. All fittings are alloy steel and other types of materials and attachments are available. Hardware specifications can be found on the folowing: Masterlink (With Flat), Masterlinks With Subassemblies (And Flats), Eye Hooks and Swival Hooks.

    Endless bridle slings allow for sling rotation. Do not place the sling tag in a contact point with bridle masterlink or fittings.
     

     Work Load Limits for Multi-Leg Bridle Assemblies are based on the following conditions:

    1. Even load weight distribution on all legs.
    2. The bridle legs being same length. If the legs are not sharing the load equally, the assembly design factor is reduced.
    3. All bridle legs used at the same horizontal angle.

    If the conditions of the lift vary from those above, Work Load Limits must be recalculated.


    TWO LEG BRIDLE (MLB2) SPECIFICATIONS

    STOCK
    NUMBER

    COLOR CODE

    Assembly Work Load (Lbs.) Horizontal Angle

    MINIMUM

    LENGTH

    (Bearing)

    TOP FITTING

    BOTTOM FITTINGS

    MASTER

    LINK

    (Diameter)

    MASTER

    W/ SUB-ASSYS.

    (Diameter)

    MASTER

    LINK

    (Diameter)

    ALLOY

    HOOK SIZE

    (Tons)

    60°

    45°

    MLB2-RS30

    PURPLE

    4,500

    3,700

    4 ft.

    3/4"

    3/4"

    1/2"

    1.5 T

    MLB2-RS60

    GREEN

    9,100

    7,400

    4 ft.

    7/8"

    1"

    5/8"

    3 T

    MLB2-RS90

    YELLOW

    14,500

    11,800

    4 ft.

    1"

    1-1/4"

    3/4"

    5 T

    MLB2-RS120

    TAN

    18,300

    12,900

    4 ft.

    1-1/4"

    1-1/2"

    7/8"

    5 T

    MLB2-RS150

    RED

    22,800

    18,600

    4 ft.

    1-1/2"

    1-1/2"

    1"

    N/A

    MLB2-RS180

    WHITE

    29,000

    20,500

    6 ft.

    1-3/4"

    2"

    1-1/4"

    N/A

    MLB2-RS240

    BLUE

    36,700

    29,900

    6 ft.

    1-3/4"

    2"

    1-1/2"

    N/A

    MLB2-RS360DC

    GRAY

    53,600

    43,800

    8 ft.

    2"

    2-1/4"

    1-3/4"

    N/A

    *Available in Web Sling Hook design- Specify order code “W”

     

     Can fail if damaged, misused or overloaded. Inspect before use. Use by untrained personnel is hazardous. OBSERVE AND DO NOT EXCEED WORK LOAD LIMIT. DEATH and INJURY can occur from improper use or maintenance.

    Products specifications
    Product Resources Usage Information
    Product Resources Safety Bulletin-English
    Product Resources Safety Bulletin-Spanish
    Customers who bought this item also bought

    Endless Sling

    One of the most versatile nylon web slings available, Endless slings can be rotated to provide an infinite number of contact points for the ends of the endless lifting strap and where the endless sling lift strap contacts the load. Endless hoisting slings and straps are for use in choker, vertical and basket hitches. Endless sling strap ends can be tapered and reinforced on request. Endless polyester and nylon sling straps are also referred to as continuous loop slings, type 5 slings and/or grommet slings. Lift-It® Endless slings are available in either nylon or polyester webbing. The length of an endless web sling is measured pull to pull or bearing to bearing on the ends of the endless nylon lift strap, not circumferentially. Polyester web and Nylon web endless slings are formed by overlapping the ends of the heavy duty webbing to form a load carrying splice. It is recommended when using endless sling straps that the load carrying splice NOT be placed into the load or lift connection points. Likewise, when Endless slings are used in a choker hitch it is recommended that the load carrying splice be placed above the choker point and below the lifting fixture. If an endless sling configuration is desired that does not feature a load carrying splice, we’d recommend the use of a polyester roundsling. Polyester round slings are also sometimes referred to as spansets. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

    Eye & Eye Slings

    Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point unless otherwise specified. Eye & Eye nylon lifting slings featuring flat eyes can be used in all three hitches: choker, vertical and basket. Heavy duty nylon rigging slings featuring the Flat Eye and Eye design are made in widths ranging from as narrow as 1 inch and as wide as 12 inches. All Lift-It® Flat Eye & Eye slings feature protection at the sling eye bearing points. The extra protection wrapped around the sling eye provides additional service life as this is a critical wear area for all polyester and nylon rigging slings. Sling eyes are automatically tapered to a narrower width on Eye and Eye lifting slings that are over 3 inches in width. At Lift-It we do not charge extra to taper the eyes for your 2 inch wide rigging straps. Flat Eye, Eye and Eye nylon lifting slings used by crane and rigging customers around the world provide for the lowest profile eye available. Low profile eyes make sling removal easier when tight clearances are unavoidable. Nylon rigging slings that feature flat eyes are also referred to as double eye slings or Type 3 slings. If a more supple body composition is desired consider using Lift-It® polyester roundslings in the eye and eye style. Eye & Eye polyester round slings are formed by passing an exterior sleeve over the strands of the polyester roundsling. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

    Crosby® Alloy Masterlink- A-342

    Alloy Steel, Quenched and Tempered

    OZ Premium Chain Hoist

    OZ Premium Chain Hoist Free spare latch kit with every hoist!

    Quad Leg Roundsling Bridle (MLB4)

    Lift-It® Polyester Roundsling Bridle Assemblies feature sling and hardware combinations for the efficient handling of loads with fixed lifting points. Polyester Roundsling Bridle Assemblies are lightweight and easy to handle when compared to wire rope and chain bridles. Sub-assembly not standard for top link. If required add -MSA to end of part number. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.