Search
Menu Close

Web Sling Connector - S-280

Manufacturer: Crosby
Designed to connect synthetic web slings to conventional Crosby® hardware: 320N Eye Hooks, Masterlinks, Rings and Shackles.
More...
SKU: S-280
*
$0.00
i h
Made in the USA

 

A variety of sling components for synthetic round or web slings.  The "bunching" effect is eliminated and sling efficiencies are increased.  Sling Saver Fittings are alloy construction with a 5/1 design factor.

 

Designed to connect synthetic web slings to conventional Crosby® hardware: 320N Eye Hooks, Masterlinks, Rings and Shackles.

 

 

 

SHACKLE WLL

(Lbs.)

ORDER CODE

FOR WEBBING WIDTH (Inches)

FOR EYE

WIDTH

(Inches)

FOR ROUNDSLING STOCK NUMBER(S)

DIMENSIONAL DATA (Inches)

A

B

C

D

E

F

G

H

I

J

WEIGHT (Lbs.)

6,500

1021681

2

2

RS 30/60

.75

.62

1.63

2.44

.63

.62

2.69

.56

1.19

2.02

1.5

9,000

1021690

3

1.5

 

.75

.69

1.10

2.01

.75

.69

2.19

.60

1.38

2.34

1.9

12,500

1021700

4

2

 

.75

.81

1.66

2.56

.88

.75

2.69

.69

1.62

2.46

2.9

17,000

1021709

6

3

RS 150/180

1.00

.94

2.47

3.50

1.00

.88

3.69

.88

1.88

2.84

5.1

 

 

Before use, tighten bolt, then tighten nut.
Read, understand and follow all instructions and chart information before using web connectors.

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.

PROP 65 WARNING

Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

>> Click here for more details <<
Products specifications
Made in USA Yes

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252

Email

sales@lift-it.com

Address

1603 West Second Street
Pomona, CA 91766

Emergency Fabrication

909-524-9287

909-524-9204

Have a Question?

*
*
*
Customers who bought this item also bought

Eye & Eye Slings

Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point unless otherwise specified. Eye & Eye nylon & polyester lifting slings featuring flat eyes can be used in all three hitches: choker, vertical and basket. Heavy duty nylon rigging slings featuring the Flat Eye and Eye design are made in widths ranging from as narrow as 1 inch and as wide as 12 inches. All Lift-It® Flat Eye & Eye slings feature protection at the sling eye bearing points. The extra protection wrapped around the sling eye provides additional service life as this is a critical wear area for all polyester and nylon rigging slings. Sling eyes are automatically tapered to a narrower width on Eye and Eye lifting slings that are over 3 inches in width. At Lift-It we do not charge extra to taper the eyes for your 2 inch wide rigging straps. Flat Eye, Eye and Eye nylon lifting slings used by crane and rigging customers around the world provide for the lowest profile eye available. Low profile eyes make sling removal easier when tight clearances are unavoidable. Nylon rigging slings that feature flat eyes are also referred to as double eye slings or Type 3 slings. If a more supple body composition is desired consider using Lift-It® polyester roundslings in the eye and eye style. Eye & Eye polyester round slings are formed by passing an exterior sleeve over the strands of the polyester roundsling. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*

Choker Hardware Slings

Aluminum and alloy steel choker fittings provide for the most efficient choke hitching available for webbing slings. Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*
Lift-It