Personal menu

Yale Double Braid Polydyne™

Manufacturer: Yale

More...

SKU: Yale Double Braid Polydyne™

$0.00

Made in the USA

Overview
Specifications
Product Resources
Contact Us

Polydyne™ is a high strength double-braided rope incorporating a polyester sleeve over a nylon core.

Despite the dissimilar stretch characteristics of these fibers, Polydyne™ maximizes load sharing between core and sleeve, yielding extremely high strength and high working energy absorption capacity. Available with Maxijacket Coating.

Specific Gravity: 1.24

DIELECTRIC STRENGTH
The maximum allowable leakage for new, dry, clean Polydyne™ is 500 Micro Amperes when tested at 90KV per ASTM 1701-05, “Routine Production Test”.

CAUTION Absorbed and entrained impurities will increase rope conductivity, DRAMATICALLY.

POLYDYNE™ SPECIFICATIONS
Diameter Inches	Minimum Break Strength (Lbs.)	Work Load Limit 5 To 1 (Lbs.)	Weight Per 100 Ft. (Lbs.)
1/4	2,250	450	1.9
5/16	3,420	684	2.8
3/8	4,500	900	4.4
7/16	6,750	1,350	5.8
1/2	9,900	1,980	7.6
9/16	13,500	2,700	9.7
5/8	17,010	3,402	13.3
3/4	23,400	4,680	16.8
7/8	30,240	6,048	23.5
1	37,800	7,560	32.7
1-1/8	46,800	9,360	41.5
1-1/4	58,500	11,700	50.8
1-5/16	69,300	13,860	55
1-1/2	81,000	16,200	66

Work Load Limits are based on static or moderately dynamic lifting/pulling operations. Instantaneous changes in load, up or down, in excess of 10% of line’s Work Load Limit constitutes hazardous shock loading and would void normal Work Load Limit recommendations. See the engineering information found under "Product Resources -> Yale Cordage: Index of Engineering" and consult Yale Cordage for guidelines regarding Work Load Limits and safe use of rope. Knots and abrupt bends significantly reduce rope strength and lower Work Load Limits.

Double Esterlon™ is made to Yale Cordage Specification #YCI-DE-022. Polydyne™ is made to Yale Cordage Specification #YCI-PD-012. Splice Double Esterlon™ or Polydyne™ using Yale’s splicing document No. 10017200.

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.

Warning See 'Product Resources' tab above for Warning Information

PROP 65 WARNING

Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

>> Click here for more details <<

Products specifications

Made in USA	Yes

Products specifications

Product Resources
Product Resource	Index of Engineering

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252

Email

sales@lift-it.com

Address

1603 West Second Street
Pomona, CA 91766

Emergency Fabrication

909-524-9287

909-524-9204

Have a Question?

Your name *

Your email *

Comments *