Search
Menu Close

1" Wide Polyester Max Edge™ Eye & Eye Sling | 1 Ply

Manufacturer: Lift-It
Polyester Max Edge™ Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point (Order Code J), unless otherwise specified.
More...
SKU: EE1-901PME
*
Choker WLL (Lbs) 1,200 lbs
Vertical WLL (Lbs) 1,600 lbs
90° Basket WLL (Lbs) 3,200 lbs
$18.25
i h
Fabrication Time: 3-5 days
Made in the USA

Polyester Max Edge™ Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point (Order Code J), unless otherwise specified.

Tapered eyes are automatically furnished on slings over 2 inches wide to provide for a proper relationship between the sling eyes and the lifting hardware. Eyes with no tapering are available.

The bearing points of Half Twist (Type 4) eyes are oriented 90° to the sling body. The perpendicular relationship between the eye and sling body in Half Twist, Type 4 eyes results in a comparatively advantageous choke hitch, when compared to Flat (Type 3) eyes. Half Twist eyes perform equally well in vertical or basket hitches.

For Half Twist Eyes with Taper, specify "HTT" (EE1-902PME HTT) Eye Width-1"
For Half Twist Eyes with no taper, specify "HT" (EE1-902PME HT) Eye Width-2"

For Flat Eyes with Taper, specify "FT" (Example: EE1-902PME FT) Eye Width-1"
For Flat Eyes with no taper, specify "FE" (Example: EE1-902PME FE) Eye Width-2"

Eyes depicted feature standard eye protection, Order Code "J" and does not need to be added to sling stock number. Other eye treatments are available.

 

 

 

 

Work Load Limits (Lbs.)

 

Choker

Vertical

Basket Hitches

Width (Inches)

Stock Number

Eye Dimensions

(Inches)

90°

60°

45°

Sling Weight (Lbs.)

Minimum

Sling

Length

(Ft.)

Width

Length

Base
8 Ft.

Adder / Ft.

1"

EE1-901PME

1"

9"

1,200

1,600

3,200

2,770

2,260

.67

.056

4

1"

EE2-901PME

1"

9"

2,500

3,200

6,400

5,540

4,520

1.00

.112

3

1"

EE4-901PME

1"

12"

5,000

6,400

12,800

11,080

9,050

2.07

.220

4

2"

EE1-902PME

2"

12"

2,500

3,200

6,400

5,540

4,520

1.34

.112

4

2"

EE2-902PME

2"

12"

5,000

6,400

12,800

11,080

9,050

2.02

.220

4

2"

EE4-902PME

2"

12"

9,000

11,400

22,800

19,740

16,120

4.14

.440

4

3"

EE1-903PME

1-1/2"

12"

3,800

4,800

9,600

8,310

6,780

2.29

.180

4

3"

EE2-903PME

1-1/2"

12"

7,000

8,860

17,720

15,340

12,530

3.24

.350

4

3"

EE4-903PME

1-1/2"

18"

13,000

17,000

34,000

29,440

24,040

6.60

.700

5

4"

EE1-904PME

1-1/2"

14"

5,000

6,400

12,800

11,080

9,050

2.86

.220

5

4"

EE2-904PME

1-1/2"

14"

9,000

11,400

22,800

19,740

16,120

3.96

.440

5

4"

EE4-904PME

2"

18"

18,000

22,800

45,600

39,480

32,240

8.36

.880

5

 

Slings can be damaged and cut when lifting on load edges, corners, protrusions or over abrasive surfaces. The sling must ALWAYS be protected with materials of sufficient strength, thickness and construction to prevent damage and catastrophic sling failure. Sling protection must be installed and evaluated for suitability by raising the load slightly, and then lowering the load for an inspection of the sling and the protection devices. Several "test" lifts, inspections and evaluations may be necessary to determine the proper form of protection for a successful lift. Damaged or misused sling protection can result in sling failure. Inspect the sling protection before each use and remove if damaged. Be sure the Sling Protection is the correct type and size to protect the sling. The length of the sleeve or protection material(s) must not interfere with the sling closing to the full gripping position on the load. Sling protection may not prevent cutting or other forms of sling damage. To avoid severe personal injury or death, personnel should be kept away from the load and never be under or near the load, while it is being lifted or suspended.

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.

PROP 65 WARNING

Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

>> Click here for more details <<
Products specifications
Made in USA Yes
Width (inches) 1"
Ply 1
Choker WLL (Lbs) 1,200
Vertical WLL (Lbs) 1,600
90° Basket WLL (Lbs) 3,200
Products specifications
Product Resources
Product Resource Product Spec Use Considerations
Product Resource Product Spec Web Sling Inspection
Product Resource Product Spec Sling Hitches
Product Resource Product Spec Safety Bulletin-English
Product Resource Product Spec Safety Bulletin-Spanish

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252

Email

sales@lift-it.com

Address

1603 West Second Street
Pomona, CA 91766

Emergency Fabrication

909-524-9287

909-524-9204

Have a Question?

*
*
*
Lift-It