Search
Menu Close

2" Wide Polyester Max Edge™ Eye & Eye Sling | 4 Ply

Manufacturer: Lift-It
Polyester Max Edge™ Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point (Order Code J), unless otherwise specified.
More...
SKU: EE4-902PME
*
Choker WLL (Lbs) 9,000
Vertical WLL (Lbs) 11,400
90° Basket WLL (Lbs) 22,800
$60.61
i h
Fabrication Time: 8-11 days
Made in the USA

Polyester Max Edge™ Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point (Order Code J), unless otherwise specified.

Tapered eyes are automatically furnished on slings over 2 inches wide to provide for a proper relationship between the sling eyes and the lifting hardware. Eyes with no tapering are available.

The bearing points of Half Twist (Type 4) eyes are oriented 90° to the sling body. The perpendicular relationship between the eye and sling body in Half Twist, Type 4 eyes results in a comparatively advantageous choke hitch, when compared to Flat (Type 3) eyes. Half Twist eyes perform equally well in vertical or basket hitches.

For Half Twist Eyes with Taper, specify "HTT" (EE1-902PME HTT) Eye Width-1"
For Half Twist Eyes with no taper, specify "HT" (EE1-902PME HT) Eye Width-2"

For Flat Eyes with Taper, specify "FT" (Example: EE1-902PME FT) Eye Width-1"
For Flat Eyes with no taper, specify "FE" (Example: EE1-902PME FE) Eye Width-2"

Eyes depicted feature standard eye protection, Order Code "J" and does not need to be added to sling stock number. Other eye treatments are available.

 

 

 

 

Work Load Limits (Lbs.)

 

Choker

Vertical

Basket Hitches

Width (Inches)

Stock Number

Eye Dimensions

(Inches)

90°

60°

45°

Sling Weight (Lbs.)

Minimum

Sling

Length

(Ft.)

Width

Length

Base
8 Ft.

Adder / Ft.

1"

EE1-901PME

1"

9"

1,200

1,600

3,200

2,770

2,260

.67

.056

4

1"

EE2-901PME

1"

9"

2,500

3,200

6,400

5,540

4,520

1.00

.112

3

1"

EE4-901PME

1"

12"

5,000

6,400

12,800

11,080

9,050

2.07

.220

4

2"

EE1-902PME

2"

12"

2,500

3,200

6,400

5,540

4,520

1.34

.112

4

2"

EE2-902PME

2"

12"

5,000

6,400

12,800

11,080

9,050

2.02

.220

4

2"

EE4-902PME

2"

12"

9,000

11,400

22,800

19,740

16,120

4.14

.440

4

3"

EE1-903PME

1-1/2"

12"

3,800

4,800

9,600

8,310

6,780

2.29

.180

4

3"

EE2-903PME

1-1/2"

12"

7,000

8,860

17,720

15,340

12,530

3.24

.350

4

3"

EE4-903PME

1-1/2"

18"

13,000

17,000

34,000

29,440

24,040

6.60

.700

5

4"

EE1-904PME

1-1/2"

14"

5,000

6,400

12,800

11,080

9,050

2.86

.220

5

4"

EE2-904PME

1-1/2"

14"

9,000

11,400

22,800

19,740

16,120

3.96

.440

5

4"

EE4-904PME

2"

18"

18,000

22,800

45,600

39,480

32,240

8.36

.880

5

 

Slings can be damaged and cut when lifting on load edges, corners, protrusions or over abrasive surfaces. The sling must ALWAYS be protected with materials of sufficient strength, thickness and construction to prevent damage and catastrophic sling failure. Sling protection must be installed and evaluated for suitability by raising the load slightly, and then lowering the load for an inspection of the sling and the protection devices. Several "test" lifts, inspections and evaluations may be necessary to determine the proper form of protection for a successful lift. Damaged or misused sling protection can result in sling failure. Inspect the sling protection before each use and remove if damaged. Be sure the Sling Protection is the correct type and size to protect the sling. The length of the sleeve or protection material(s) must not interfere with the sling closing to the full gripping position on the load. Sling protection may not prevent cutting or other forms of sling damage. To avoid severe personal injury or death, personnel should be kept away from the load and never be under or near the load, while it is being lifted or suspended.

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.

PROP 65 WARNING

Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

>> Click here for more details <<
Products specifications
Made in USA Yes
Width (inches) 2"
Ply 4
Choker WLL (Lbs) 9,000
Vertical WLL (Lbs) 11,400
90° Basket WLL (Lbs) 22,800
Products specifications
Product Resources
Product Resource Product Spec Use Considerations
Product Resource Product Spec Web Sling Inspection
Product Resource Product Spec Sling Hitches
Product Resource Product Spec Safety Bulletin-English
Product Resource Product Spec Safety Bulletin-Spanish

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252

Email

sales@lift-it.com

Address

1603 West Second Street
Pomona, CA 91766

Emergency Fabrication

909-524-9287

909-524-9204

Have a Question?

*
*
*
Customers who bought this item also bought

2" Wide Reversed Eye Sling | 1 Ply | Heavy Duty

RE1-901P
Reversed Eye slings are nylon web slings which feature sling eyes and body that are covered by Bulked Nylon, also referred to as Cordura®, wear pads. Bulked Nylon wear pad material is four times more abrasion resistant than webbing used in regular nylon lifting slings, but provides no protection against cutting. The Reversed Eye lift strap is also referred to as a Return Eye sling. Since the body of Reversed Eye slings is based upon an endless sling design, the web strap eye is one half the overall body width. The sling eye can further be reduced by tapering the sling eye before installing the Cordura® wear pads on each side of the sling body. When you receive the Reversed Eye sling, the sling capacity tag is on the side OPPOSITE the working face or load contact surface of the sling. Responsible sling users in the sling, rigging and material handling industries always inspect the sling before each use. When abrasion is detected that does not penetrate into the load bearing sling webbing the sling user can rotate or “reverse” the sling eyes, which also provides a new bearing surface on the sling body. The bearing points of Reversed Eye hoisting sling-Standard (Type 6) eyes are 90° to the web sling body. The perpendicular relationship between the eye and body in a Reversed Eye lifting sling-Standard (Type 6) results in a better choke hitch, when compared to the Reversed Eye hoisting sling-Flat (Type 7). The Reversed Eye sling-Flat (Type 7) body is turned 180°, forming an eye, in the same plane as the sling body. The type 7 or flat Reverse Eye web sling is not frequently made, but provides a lower profile lifting sling for removal when space is limited. Type 6 and Type 7 Reversed Eye web slings can be used in choker, vertical or basket hitches. Standard widths for Reversed eye nylon web slings range from 2 inches to 6 inches. On request we can manufacture 8, 10 and 12 inch wide Reverse Eye lifting slings. Stock numbers for Reverse Eye slings do not reflect the overall sling width, but refer to the width of the component webbing, laid side by side to form up the body of the Reversed Eye lifting strap. An example would be, RE2-902 which would be the call out for a Reversed Eye web sling that is made from heavy duty nylon sling material (9800 Lbs. unsewn tensile strength- Class 7), 2 inches wide and two ply thick. The 2 inch material is sewn into an endless web sling configuration with the strands of the endless set side by side. After the eye buffers have been sewn to each side of the sling eye, 4 inch material is used to finish the fabrication of the nylon lifting sling. Sometimes it’s a hard sell to convince sling users that it is a better investment to spend more for a Reversed Eye sling. Reversed Eye web slings are roughly twice the price of an equivalent strength Eye and Eye sling. The combination of wear resistant materials, coupled with the ability to change out the bearing surfaces on the sling eyes and bodies make the Reversed Eye hoisting strap, the nylon sling of choice for professionals in the heavy duty sling, rigging and crane industries. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*
$39.40

3" Wide Quick Web Sleeve | WQS-3

WQS-3
Sleeves cover both sides of the sling and can be moved to a specific location. Sleeves can also be re-positioned for quick and easy inspection of the sling.
*
$15.56

1" Wide Polyester Max Edge™ Eye & Eye Sling | 2 Ply

EE2-901PME
Polyester Max Edge™ Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point (Order Code J), unless otherwise specified.
*
$23.83

1" Wide Polyester Max Edge™ Eye & Eye Sling | 1 Ply

EE1-901PME
Polyester Max Edge™ Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point (Order Code J), unless otherwise specified.
*
$20.28

3" Wide Sewn Felt Sleeve | 3/8" Thick

FS380-3
Felt Sleeves provide protection from abrasion damage caused by contact with rough surfaces.
*
$8.56
Lift-It