18 1/4" Magnetic Corner Protectors | Regular

Magnetic Corner Protectors are fabricated from a durable synthetic material that protects synthetic and wire rope slings from damage. Magnetic Corner Protectors are for use on 90 degree, "cornered" loads and keep the sling from contacting load edges.

Magnetic Corner Protector ratings are valid if the 90 degree, CORNERED load fully engages the internal walls of the protector.

Magnetic Corner Protectors are "protection rated" at 12,500 Lbs. per inch of sling contact width. Heavy Duty Magnetic Protectors provide a larger contact diameter, but are not rated higher than Regular Magnetic Corner Protectors. Magnetic Corner Protectors can be used at temperatures from -20°F/-29°C to 220°F/104°C.

Slotted Magnetic Corner Protectors are available. Please specify flange thickness and width.

Curved Magnetic Corner Protectors are custom made to fit the exact curvature of your load. Spacer Protectors are necessary in applications where slings are not perpendicular (sling-to-load angles less than 90 degrees).

Magnets are designed to keep Magnetic Corner Protectors from falling from metallic loads and are not intended to prevent the protector or sling from sliding. Slings and protectors should be vertical or perpendicular to the load. The farther from vertical slings and protectors are, the more likely the protectors and slings will slide to become vertical, resulting in load instability and uncontrolled load descent. Keep magnets clean and free of debris. Damaged or misused sling protection can result in sling failure. Inspect sling protection before each use and remove if damaged. Be sure sling protection is the correct type and size to protect the sling.