3/8" Double Leg Adjustable Rope Sling

Adjustable Rope Slings replace multiple, “non-adjustable” slings by accommodating a range of dimensional requirements with infinite adjustability.

Available in single, double and four leg configurations, standard Adjustable Rope Slings are made from single braid, twelve strand, polyester rope. The polyester rope is treated with a coating to optimize Adjustable Rope Sling service life.

Adjustable Rope Slings fabricated from Vectrus rope provide higher Work Load Limits than standard, polyester rope slings. Vectrus is a single braid, high performance fiber rope, made of Liquid Crystal Polymer (LCP). Super strong and ultra light, Vectrus Adjustable Rope Slings are treated with a coating to enhance abrasion and UV degradation resistance.

Lift-It Adjustable Rope Slings feature wear protection sleeves in the lift and connection eyes. Hooks, thimbles and other hardware can also be attached, by special request.

Adjustable Rope Slings are labeled with the information currently required by the various regulatory agencies. Custom lengths are available.
 

Lift-It® Four Leg Adjustable Rope Slings feature a Top Lifting Link. Depending upon your selection, based on Work Load, you must determine whether a Masterlink or Masterlink with Subassemblies makes the most sense from a fitting weight perspective. With either option, heavy duty thimbles are attached at the connection points to the Top Lifting Link.

Lift-It® Adjustable Rope Slings with Top Lifting Links feature hardware that is substantially larger than other manufacturers. We take into account not only the strength requirements, but the spatial relationship between sling attachment points and interfacing hardware.

Lift-It® Bridle Assembly capacities are lower than our competitors. Four Leg Bridle Assembly capacities are based on three legs carrying the assigned capacity.

Lower capacities and more expensive, larger hardware will never allow us to be the successful, low bidder. Our conservative approach is respected by conscientious users and appreciated by sophisticated purchasers. In this instance, spending more for less provides for increased safety and longer sling service.

Lifts can be made with any two or three legs of the four leg, Adjustable Rope Sling, if it has a Masterlink or Masterlink with subassembly. If three of the four legs are used, the assembly Work Load Limit must be reduced by 33% and is effectively the same as the work load for a two leg (double) sling.

DOUBLE LEG - ADJUSTABLE ROPE SLINGS ROPE DIAMETER STOCK NUMBER POLYESTER WLL (Lbs.) ADJ. RANGE       60 DEG. 45 DEG.     3/8 In. Y-D-382460 1,700 1,400 24-60"         1/2 In. Y-D-123260 3,400 2,800 32-60"         5/8 In. Y-D-583860 5,100 4,200 38-60"         3/4 In. Y-D-344672 6,900 5,600 46-72"         7/8 In. Y-D-785296 10,300 8,400 52-96"         1 in Y-D-10060120 12,100 9,800 60"-120"
Work Load Limits for Multi-Leg Bridle Assemblies are based on the following conditions: Even load weight distribution on all legs. Bridle legs being same length. If the legs are not sharing the load equally, the assembly design factor is reduced. All bridle legs used at the same horizontal angle. If the conditions of the lift vary from those above, Work Load Limits must be recalculated.	DO NOT EXCEED WORK LOAD LIMITS Refer to "Product Resources" for Important Safety, Use and Inspection Information.
	Can fail if damaged, misused or overloaded. Inspect before use. Use by untrained personnel is hazardous. OBSERVE AND DO NOT EXCEED WORK LOAD LIMIT. DEATH and INJURY can occur from improper use or maintenance.