Lift-It

Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point unless otherwise specified. Eye & Eye nylon & polyester lifting slings featuring flat eyes can be used in all three hitches: choker, vertical and basket. Heavy duty nylon rigging slings featuring the Flat Eye and Eye design are made in widths ranging from as narrow as 1 inch and as wide as 12 inches. All Lift-It® Flat Eye & Eye slings feature protection at the sling eye bearing points. The extra protection wrapped around the sling eye provides additional service life as this is a critical wear area for all polyester and nylon rigging slings. Sling eyes are automatically tapered to a narrower width on Eye and Eye lifting slings that are over 3 inches in width. At Lift-It we do not charge extra to taper the eyes for your 2 inch wide rigging straps. Flat Eye, Eye and Eye nylon lifting slings used by crane and rigging customers around the world provide for the lowest profile eye available. Low profile eyes make sling removal easier when tight clearances are unavoidable. Nylon rigging slings that feature flat eyes are also referred to as double eye slings or Type 3 slings. If a more supple body composition is desired consider using Lift-It® polyester roundslings in the eye and eye style. Eye & Eye polyester round slings are formed by passing an exterior sleeve over the strands of the polyester roundsling. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point unless otherwise specified. Eye & Eye nylon & polyester lifting slings featuring flat eyes can be used in all three hitches: choker, vertical and basket. Heavy duty nylon rigging slings featuring the Flat Eye and Eye design are made in widths ranging from as narrow as 1 inch and as wide as 12 inches. All Lift-It® Flat Eye & Eye slings feature protection at the sling eye bearing points. The extra protection wrapped around the sling eye provides additional service life as this is a critical wear area for all polyester and nylon rigging slings. Sling eyes are automatically tapered to a narrower width on Eye and Eye lifting slings that are over 3 inches in width. At Lift-It we do not charge extra to taper the eyes for your 2 inch wide rigging straps. Flat Eye, Eye and Eye nylon lifting slings used by crane and rigging customers around the world provide for the lowest profile eye available. Low profile eyes make sling removal easier when tight clearances are unavoidable. Nylon rigging slings that feature flat eyes are also referred to as double eye slings or Type 3 slings. If a more supple body composition is desired consider using Lift-It® polyester roundslings in the eye and eye style. Eye & Eye polyester round slings are formed by passing an exterior sleeve over the strands of the polyester roundsling. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point unless otherwise specified. Eye & Eye nylon & polyester lifting slings featuring flat eyes can be used in all three hitches: choker, vertical and basket. Heavy duty nylon rigging slings featuring the Flat Eye and Eye design are made in widths ranging from as narrow as 1 inch and as wide as 12 inches. All Lift-It® Flat Eye & Eye slings feature protection at the sling eye bearing points. The extra protection wrapped around the sling eye provides additional service life as this is a critical wear area for all polyester and nylon rigging slings. Sling eyes are automatically tapered to a narrower width on Eye and Eye lifting slings that are over 3 inches in width. At Lift-It we do not charge extra to taper the eyes for your 2 inch wide rigging straps. Flat Eye, Eye and Eye nylon lifting slings used by crane and rigging customers around the world provide for the lowest profile eye available. Low profile eyes make sling removal easier when tight clearances are unavoidable. Nylon rigging slings that feature flat eyes are also referred to as double eye slings or Type 3 slings. If a more supple body composition is desired consider using Lift-It® polyester roundslings in the eye and eye style. Eye & Eye polyester round slings are formed by passing an exterior sleeve over the strands of the polyester roundsling. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point unless otherwise specified. Eye & Eye nylon & polyester lifting slings featuring flat eyes can be used in all three hitches: choker, vertical and basket. Heavy duty nylon rigging slings featuring the Flat Eye and Eye design are made in widths ranging from as narrow as 1 inch and as wide as 12 inches. All Lift-It® Flat Eye & Eye slings feature protection at the sling eye bearing points. The extra protection wrapped around the sling eye provides additional service life as this is a critical wear area for all polyester and nylon rigging slings. Sling eyes are automatically tapered to a narrower width on Eye and Eye lifting slings that are over 3 inches in width. At Lift-It we do not charge extra to taper the eyes for your 2 inch wide rigging straps. Flat Eye, Eye and Eye nylon lifting slings used by crane and rigging customers around the world provide for the lowest profile eye available. Low profile eyes make sling removal easier when tight clearances are unavoidable. Nylon rigging slings that feature flat eyes are also referred to as double eye slings or Type 3 slings. If a more supple body composition is desired consider using Lift-It® polyester roundslings in the eye and eye style. Eye & Eye polyester round slings are formed by passing an exterior sleeve over the strands of the polyester roundsling. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Endless slings are a versatile sling as hook and load contact points can be rotated. For use in choker, vertical and basket hitches. Sling ends can be tapered and reinforced on request.

Endless slings are a versatile sling as hook and load contact points can be rotated. For use in choker, vertical and basket hitches. Sling ends can be tapered and reinforced on request.

Endless slings are a versatile sling as hook and load contact points can be rotated. For use in choker, vertical and basket hitches. Sling ends can be tapered and reinforced on request.

Endless slings are a versatile sling as hook and load contact points can be rotated. For use in choker, vertical and basket hitches. Sling ends can be tapered and reinforced on request.

Polyester Max Edge™ Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point (Order Code J), unless otherwise specified.

Polyester Max Edge™ Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point (Order Code J), unless otherwise specified.

Polyester Max Edge™ Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point (Order Code J), unless otherwise specified.

(MLB4) Four Leg Bridle Assembly capacities are based on three legs carrying the assigned capacity. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Reversed Eye slings are nylon web slings which feature sling eyes and body that are covered by Bulked Nylon, also referred to as Cordura®, wear pads. Bulked Nylon wear pad material is four times more abrasion resistant than webbing used in regular nylon lifting slings, but provides no protection against cutting. The Reversed Eye lift strap is also referred to as a Return Eye sling. Since the body of Reversed Eye slings is based upon an endless sling design, the web strap eye is one half the overall body width. The sling eye can further be reduced by tapering the sling eye before installing the Cordura® wear pads on each side of the sling body. When you receive the Reversed Eye sling, the sling capacity tag is on the side OPPOSITE the working face or load contact surface of the sling. Responsible sling users in the sling, rigging and material handling industries always inspect the sling before each use. When abrasion is detected that does not penetrate into the load bearing sling webbing the sling user can rotate or “reverse” the sling eyes, which also provides a new bearing surface on the sling body. The bearing points of Reversed Eye hoisting sling-Standard (Type 6) eyes are 90° to the web sling body. The perpendicular relationship between the eye and body in a Reversed Eye lifting sling-Standard (Type 6) results in a better choke hitch, when compared to the Reversed Eye hoisting sling-Flat (Type 7). The Reversed Eye sling-Flat (Type 7) body is turned 180°, forming an eye, in the same plane as the sling body. The type 7 or flat Reverse Eye web sling is not frequently made, but provides a lower profile lifting sling for removal when space is limited. Type 6 and Type 7 Reversed Eye web slings can be used in choker, vertical or basket hitches. Standard widths for Reversed eye nylon web slings range from 2 inches to 6 inches. On request we can manufacture 8, 10 and 12 inch wide Reverse Eye lifting slings. Stock numbers for Reverse Eye slings do not reflect the overall sling width, but refer to the width of the component webbing, laid side by side to form up the body of the Reversed Eye lifting strap. An example would be, RE2-902 which would be the call out for a Reversed Eye web sling that is made from heavy duty nylon sling material (9800 Lbs. unsewn tensile strength- Class 7), 2 inches wide and two ply thick. The 2 inch material is sewn into an endless web sling configuration with the strands of the endless set side by side. After the eye buffers have been sewn to each side of the sling eye, 4 inch material is used to finish the fabrication of the nylon lifting sling. Sometimes it’s a hard sell to convince sling users that it is a better investment to spend more for a Reversed Eye sling. Reversed Eye web slings are roughly twice the price of an equivalent strength Eye and Eye sling. The combination of wear resistant materials, coupled with the ability to change out the bearing surfaces on the sling eyes and bodies make the Reversed Eye hoisting strap, the nylon sling of choice for professionals in the heavy duty sling, rigging and crane industries. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Reversed Eye slings are nylon web slings which feature sling eyes and body that are covered by Bulked Nylon, also referred to as Cordura®, wear pads. Bulked Nylon wear pad material is four times more abrasion resistant than webbing used in regular nylon lifting slings, but provides no protection against cutting. The Reversed Eye lift strap is also referred to as a Return Eye sling. Since the body of Reversed Eye slings is based upon an endless sling design, the web strap eye is one half the overall body width. The sling eye can further be reduced by tapering the sling eye before installing the Cordura® wear pads on each side of the sling body. When you receive the Reversed Eye sling, the sling capacity tag is on the side OPPOSITE the working face or load contact surface of the sling. Responsible sling users in the sling, rigging and material handling industries always inspect the sling before each use. When abrasion is detected that does not penetrate into the load bearing sling webbing the sling user can rotate or “reverse” the sling eyes, which also provides a new bearing surface on the sling body. The bearing points of Reversed Eye hoisting sling-Standard (Type 6) eyes are 90° to the web sling body. The perpendicular relationship between the eye and body in a Reversed Eye lifting sling-Standard (Type 6) results in a better choke hitch, when compared to the Reversed Eye hoisting sling-Flat (Type 7). The Reversed Eye sling-Flat (Type 7) body is turned 180°, forming an eye, in the same plane as the sling body. The type 7 or flat Reverse Eye web sling is not frequently made, but provides a lower profile lifting sling for removal when space is limited. Type 6 and Type 7 Reversed Eye web slings can be used in choker, vertical or basket hitches. Standard widths for Reversed eye nylon web slings range from 2 inches to 6 inches. On request we can manufacture 8, 10 and 12 inch wide Reverse Eye lifting slings. Stock numbers for Reverse Eye slings do not reflect the overall sling width, but refer to the width of the component webbing, laid side by side to form up the body of the Reversed Eye lifting strap. An example would be, RE2-902 which would be the call out for a Reversed Eye web sling that is made from heavy duty nylon sling material (9800 Lbs. unsewn tensile strength- Class 7), 2 inches wide and two ply thick. The 2 inch material is sewn into an endless web sling configuration with the strands of the endless set side by side. After the eye buffers have been sewn to each side of the sling eye, 4 inch material is used to finish the fabrication of the nylon lifting sling. Sometimes it’s a hard sell to convince sling users that it is a better investment to spend more for a Reversed Eye sling. Reversed Eye web slings are roughly twice the price of an equivalent strength Eye and Eye sling. The combination of wear resistant materials, coupled with the ability to change out the bearing surfaces on the sling eyes and bodies make the Reversed Eye hoisting strap, the nylon sling of choice for professionals in the heavy duty sling, rigging and crane industries. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Reversed Eye slings are nylon web slings which feature sling eyes and body that are covered by Bulked Nylon, also referred to as Cordura®, wear pads. Bulked Nylon wear pad material is four times more abrasion resistant than webbing used in regular nylon lifting slings, but provides no protection against cutting. The Reversed Eye lift strap is also referred to as a Return Eye sling. Since the body of Reversed Eye slings is based upon an endless sling design, the web strap eye is one half the overall body width. The sling eye can further be reduced by tapering the sling eye before installing the Cordura® wear pads on each side of the sling body. When you receive the Reversed Eye sling, the sling capacity tag is on the side OPPOSITE the working face or load contact surface of the sling. Responsible sling users in the sling, rigging and material handling industries always inspect the sling before each use. When abrasion is detected that does not penetrate into the load bearing sling webbing the sling user can rotate or “reverse” the sling eyes, which also provides a new bearing surface on the sling body. The bearing points of Reversed Eye hoisting sling-Standard (Type 6) eyes are 90° to the web sling body. The perpendicular relationship between the eye and body in a Reversed Eye lifting sling-Standard (Type 6) results in a better choke hitch, when compared to the Reversed Eye hoisting sling-Flat (Type 7). The Reversed Eye sling-Flat (Type 7) body is turned 180°, forming an eye, in the same plane as the sling body. The type 7 or flat Reverse Eye web sling is not frequently made, but provides a lower profile lifting sling for removal when space is limited. Type 6 and Type 7 Reversed Eye web slings can be used in choker, vertical or basket hitches. Standard widths for Reversed eye nylon web slings range from 2 inches to 6 inches. On request we can manufacture 8, 10 and 12 inch wide Reverse Eye lifting slings. Stock numbers for Reverse Eye slings do not reflect the overall sling width, but refer to the width of the component webbing, laid side by side to form up the body of the Reversed Eye lifting strap. An example would be, RE2-902 which would be the call out for a Reversed Eye web sling that is made from heavy duty nylon sling material (9800 Lbs. unsewn tensile strength- Class 7), 2 inches wide and two ply thick. The 2 inch material is sewn into an endless web sling configuration with the strands of the endless set side by side. After the eye buffers have been sewn to each side of the sling eye, 4 inch material is used to finish the fabrication of the nylon lifting sling. Sometimes it’s a hard sell to convince sling users that it is a better investment to spend more for a Reversed Eye sling. Reversed Eye web slings are roughly twice the price of an equivalent strength Eye and Eye sling. The combination of wear resistant materials, coupled with the ability to change out the bearing surfaces on the sling eyes and bodies make the Reversed Eye hoisting strap, the nylon sling of choice for professionals in the heavy duty sling, rigging and crane industries. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Reversed Eye slings are nylon web slings which feature sling eyes and body that are covered by Bulked Nylon, also referred to as Cordura®, wear pads. Bulked Nylon wear pad material is four times more abrasion resistant than webbing used in regular nylon lifting slings, but provides no protection against cutting. The Reversed Eye lift strap is also referred to as a Return Eye sling. Since the body of Reversed Eye slings is based upon an endless sling design, the web strap eye is one half the overall body width. The sling eye can further be reduced by tapering the sling eye before installing the Cordura® wear pads on each side of the sling body. When you receive the Reversed Eye sling, the sling capacity tag is on the side OPPOSITE the working face or load contact surface of the sling. Responsible sling users in the sling, rigging and material handling industries always inspect the sling before each use. When abrasion is detected that does not penetrate into the load bearing sling webbing the sling user can rotate or “reverse” the sling eyes, which also provides a new bearing surface on the sling body. The bearing points of Reversed Eye hoisting sling-Standard (Type 6) eyes are 90° to the web sling body. The perpendicular relationship between the eye and body in a Reversed Eye lifting sling-Standard (Type 6) results in a better choke hitch, when compared to the Reversed Eye hoisting sling-Flat (Type 7). The Reversed Eye sling-Flat (Type 7) body is turned 180°, forming an eye, in the same plane as the sling body. The type 7 or flat Reverse Eye web sling is not frequently made, but provides a lower profile lifting sling for removal when space is limited. Type 6 and Type 7 Reversed Eye web slings can be used in choker, vertical or basket hitches. Standard widths for Reversed eye nylon web slings range from 2 inches to 6 inches. On request we can manufacture 8, 10 and 12 inch wide Reverse Eye lifting slings. Stock numbers for Reverse Eye slings do not reflect the overall sling width, but refer to the width of the component webbing, laid side by side to form up the body of the Reversed Eye lifting strap. An example would be, RE2-902 which would be the call out for a Reversed Eye web sling that is made from heavy duty nylon sling material (9800 Lbs. unsewn tensile strength- Class 7), 2 inches wide and two ply thick. The 2 inch material is sewn into an endless web sling configuration with the strands of the endless set side by side. After the eye buffers have been sewn to each side of the sling eye, 4 inch material is used to finish the fabrication of the nylon lifting sling. Sometimes it’s a hard sell to convince sling users that it is a better investment to spend more for a Reversed Eye sling. Reversed Eye web slings are roughly twice the price of an equivalent strength Eye and Eye sling. The combination of wear resistant materials, coupled with the ability to change out the bearing surfaces on the sling eyes and bodies make the Reversed Eye hoisting strap, the nylon sling of choice for professionals in the heavy duty sling, rigging and crane industries. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Lift-It® Bridle Assemblies feature combinations of links, fabric eyes and hooks for the efficient handling of loads with fixed lifting points. Synthetic Bridle Assemblies are lightweight and easy to handle when compared to wire and chain bridles. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Basket Hardware Slings feature fittings of aluminum (ABH) or alloy steel (SBH). Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Basket Hardware Slings feature fittings of aluminum (ABH) or alloy steel (SBH). Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Basket Hardware Slings feature fittings of aluminum (ABH) or alloy steel (SBH). Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Basket Hardware Slings feature fittings of aluminum (ABH) or alloy steel (SBH). Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Basket Hardware Slings feature fittings of aluminum (ABH) or alloy steel (SBH). Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Basket Hardware Slings feature fittings of aluminum (ABH) or alloy steel (SBH). Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Aluminum and alloy steel choker fittings provide for the most efficient choke hitching available for webbing slings. Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Aluminum and alloy steel choker fittings provide for the most efficient choke hitching available for webbing slings. Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Aluminum and alloy steel choker fittings provide for the most efficient choke hitching available for webbing slings. Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Aluminum and alloy steel choker fittings provide for the most efficient choke hitching available for webbing slings. Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Aluminum and alloy steel choker fittings provide for the most efficient choke hitching available for webbing slings. Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Aluminum and alloy steel choker fittings provide for the most efficient choke hitching available for webbing slings. Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Lift-It® Bridle Assembly capacities are lower than our competitors. (MLB3)Three Leg Bridle Assembly capacities are based upon 2-1/2 legs carrying the assigned capacity. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Lift-It® Bushing Slings are used in the installation and/or removal of transformer bushings

CornerMax® Sleeves are an ideal solution to protect slings from cutting when it is not practical to use protection that is based upon full, 90º, corner contact.

CornerMax® Velcro Pads are an ideal solution to protect slings from cutting when it is not practical to use protection that is based upon full, 90º, corner contact.

Web Cargo Nets are considerably more flexible, lightweight and compact than wire or manila rope nets. Military Specification Cargo Nets are manufactured to: Department of Defense specification-MIL-S-18313G and have a mesh opening size of approximately 6.25 inches square. Commercially produced Cargo Nets and non-standard sized nets are also readily available.

Web Cargo Nets are considerably more flexible, lightweight and compact than wire or manila rope nets. Military Specification Cargo Nets are manufactured to: Department of Defense specification-MIL-S-18313G and have a mesh opening size of approximately 6.25 inches square. Commercially produced Cargo Nets and non-standard sized nets are also readily available.

Attached Eye Cargo slings provide the same features as Wide Body Cargo slings. The special eye construction allows Attached Eye Cargo slings to be used with small hooks. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Wide Body Cargo slings are designed for use in stabilizing and protecting loads over a wide surface area. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Wide Body Cargo slings are designed for use in stabilizing and protecting loads over a wide surface area. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Quick Tubular Sleeves are available in Bulked Nylon, Web and Felt.

Quick Tubular Sleeves are available in Bulked Nylon, Web and Felt.

Quick Tubular Sleeves are available in Bulked Nylon, Web and Felt.

Quick Tubular Sleeves are available in Bulked Nylon, Web and Felt.

Lift-It® Soft Shackles can be used as a lightweight replacement for common heavy metal shackles. Each Lift-It® Soft Shackle is constructed from UHMPE rope and includes Cordura® tubular chafe protection. Lift-It® Soft Shackles are clearly labeled with Work Load Limits, won't rust and do not require three men and a small boy to carry! - Up to 109,500lbs Break - UHMPE PROLINE12 Braided Rope, coated with pigment dye. - Recovery range: Large Truck, SUV and large Overland vehicles. - Fabricated by hand in the U.S.A.