Single Leg Bridle - Roundsling (SLB)

Lift-It® Polyester Roundsling Bridle Assemblies feature sling and hardware combinations for the efficient handling of loads with fixed lifting points. Polyester Roundsling Bridle Assemblies are lightweight and easy to handle when compared to wire rope and chain bridles.

Lift-It® Polyester Roundsling Bridle Assemblies feature hardware that is substantially larger than other manufacturers. We take into account not only the strength requirements, but the spatial relationship between sling attachment points and interfacing hardware.

Lift-It® Polyester Roundsling Bridle Assembly capacities are lower than our competitors. (MLB3) Three Leg Bridle Assembly capacities are based upon 2-1/2 legs carrying the assigned capacity. (MLB4) Four Leg Bridle Assembly capacities are based on three legs carrying the assigned capacity.

Lower capacities and more expensive, larger hardware will never allow us to be the successful, low bidder. Our conservative approach is respected by conscientious users and appreciated by sophisticated purchasers. In this instance, spending more for less provides for increased safety and longer sling service.

Masterlinks are welded. Forged (non-welded) masterlinks are available upon request. All hooks are supplied with latches. All fittings are alloy steel and other types of materials and attachments are available. Hardware specifications can be found on the folowing: Masterlink (With Flat), Masterlinks With Subassemblies (And Flats), Eye Hooks and Swival Hooks.

Endless bridle slings allow for sling rotation. Do not place the sling tag in a contact point with bridle masterlink or fittings.
 

Work Load Limits for Multi-Leg Bridle Assemblies are based on the following conditions: Even load weight distribution on all legs. The bridle legs being same length. If the legs are not sharing the load equally, the assembly design factor is reduced. All bridle legs used at the same horizontal angle. If the conditions of the lift vary from those above, Work Load Limits must be recalculated.

SINGLE LEG BRIDLE (SLB) SPECIFICATIONS STOCK NUMBER COLOR CODE VERTICAL WLL (Lbs.) BASKET WLL (Lbs.) MINIMUM LENGTH (Bearing) MASTER LINK (Diameter) ALLOY HOOK SIZE (Tons) SLB-RS30 PURPLE 2,650 5,300 4 ft. 1/2" 1.5 T SLB-RS60 GREEN 5,300 10,600 4 ft. 5/8" 3 T SLB-RS90 YELLOW 8,400 16,800 4 ft. 3/4" 5 T SLB-RS120 TAN 10,600 21,200 4 ft. 7/8" 5 T SLB-RS150 RED 13,200 26,400 4 ft. 1" N/A SLB-RS180 WHITE 16,800 33,600 6 ft. 1-1/4" N/A SLB-RS240 BLUE 21,200 42,400 6 ft. 1-1/2" N/A SLB-RS360DCP GRAY 31,000 62,000 8 ft. 1-3/4" N/A

*Available in Web Sling Hook design- Specify order code “W”

 Can fail if damaged, misused or overloaded. Inspect before use. Use by untrained personnel is hazardous. OBSERVE AND DO NOT EXCEED WORK LOAD LIMIT. DEATH and INJURY can occur from improper use or maintenance.