Search
Menu Close

7/8" Crosby® G-209 Screw Pin Anchor Shackle | 6.5 Ton

Manufacturer: Crosby
G-209 / S-209
More...
SKU: 1018516 - 7/8
WLL (Tons) 6.5 t
$67.20
i h
Fabrication Time: 1-2 days
Made in the USA

• Capacities – 1/3 through 55 metric tons.
• Forged, Quenched and Tempered, with alloy pins.
• Work Load Limit permanently shown on every shackle.
• Hot Dip Galvanized (G) or Self Colored (S).
• Fatigue Rated.
• Shackles 25 Ton and larger are RFID EQUIPPED.
• Shackles can be furnished proof tested with certificates to designated standards, such as: ABS, DNV, Lloyds or other certification. Charges for proof testing and certification are available when requested at the time of order.
• Shackles are Quenched and Tempered and can meet DNV impact requirements of 42 joules at -20 degrees C.
• Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability not addressed by ASME B30.26.
• Look for the Red Pin®, it’s the mark of genuine Crosby quality.
• Type approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7 and ABS Guide for Certification of Cranes.

   

 

SCREW PIN ANCHOR SHACKLE SPECIFICATIONS

Nominal

Size

(Inches)

Work
Load

Limit
(Tons)

Stock Number

Unit

Weight (Lbs.)

Dimensions (Inches)

Tolerance
+ / -

G-209

S-209

A

B

C

D

E

F

G

H

L

M

P

C

A

3/16

1/3

1018357

-

.06

.38

.25

.88

.19

.60

.56

.98

1.47

.16

1.14

.19

.06

.06

1/4

1/2

1018375

1018384

.10

.47

.31

1.13

.25

.78

.61

1.28

1.84

.19

1.43

.25

.06

.06

5/16

3/4

1018393

1018400

.19

.53

.38

1.22

.31

.84

.75

1.47

2.09

.22

1.71

.31

.06

.06

3/8

1

1018419

1018428

.31

.66

.44

1.44

.38

1.03

.91

1.78

2.49

.25

2.02

.38

.13

.06

7/16

1-1/2

1018437

1018446

.38

.75

.50

1.69

.44

1.16

1.06

2.03

2.91

.31

2.37

.44

.13

.06

1/2

2

1018455

1018464

.72

.81

.63

1.88

.50

1.31

1.19

2.31

3.28

.38

2.69

.50

.13

.06

5/8

3-1/4

1018473

1018482

1.37

1.06

.75

2.38

.63

1.69

1.50

2.94

4.19

.44

3.34

.69

.13

.06

3/4

4-3/4

1018491

1018507

2.35

1.25

.88

2.81

.75

2

1.81

3.50

4.97

.50

3.97

.81

.25

.06

7/8

6-1/2

1018516

1018525

3.62

1.44

1

3.31

.88

2.28

2.09

4.03

5.83

.50

4.50

.97

.25

.06

1

8-1/2

1018534

1018543

5.03

1.69

1.13

3.75

1

2.69

2.38

4.69

6.56

.56

5.13

1.06

.25

.06

1-1/8

9-1/2

1018552

1018561

7.41

1.81

1.25

4.25

1.16

2.91

2.69

5.16

7.47

.63

5.71

1.25

.25

.06

1-1/4

12

1018570

1018589

9.50

2.03

1.38

4.69

1.29

3.25

3

5.75

8.25

.69

6.25

1.38

.25

.06

1-3/8

13-1/2

1018598

1018605

13.53

2.25

1.50

5.25

1.42

3.63

3.31

6.38

9.16

.75

6.83

1.50

.25

.13

1-1/2

17

1018614

1018623

17.20

2.38

1.63

5.75

1.54

3.88

3.63

6.88

10

.81

7.33

1.62

.25

.13

1-3/4

25

1018632

1018641

27.78

2.88

2

7

1.84

5

4.19

8.86

12.34

1

9.06

2.25

.25

.13

2

35

1018650

1018669

45

3.25

2.25

7.75

2.08

5.75

4.81

9.97

13.68

1.22

10.35

2.40

.25

.13

2-1/2

55

1018678

1018687

85.75

4.13

2.75

10.50

2.71

7.25

5.69

12.87

17.84

1.38

13

3.13

.25

.25

*Note: Maximum Proof Load is 2 Times Work Load Limit. Minimum Ultimate Strength is 6 times Work Load Limit.

 For Work Load Limit reduction due to side loading, see "Shackle Warning Information" in above Product Resources link.

All goods are custom made and Non-returnable. Any return must be negotiated, include a return authorization number and will be subject to a restocking fee.

PROP 65 WARNING

Products made and/or supplied by Lift-It® Manufacturing can expose you to chemicals including Chromium, Formaldehyde, Cadmium, Lead, Lead based compounds DEHP, Nickel, Nickel compounds, Acrylamide, Crystalline Silica, Triethanolamine, N-Methyl-2-pyrrolidone, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

>> Click here for more details <<
Products specifications
Made in USA Yes
Diameter (inches) 7/8"
WLL (Tons) 6.5
Products specifications
Product Resources
Product Resource Product Spec Shackle Warning Information
Product Resource Product Spec Crosby Rigging Information

Contact Us Directly

Phone / Fax

Phone: 909-469-2251

Fax: 909-469-2252

Email

sales@lift-it.com

Address

1603 West Second Street
Pomona, CA 91766

Emergency Fabrication

909-524-9287

909-524-9204

Have a Question?

*
*
*
Customers who bought this item also bought

3" Wide Quick Bulked Nylon Sleeve | CQS-3

CQS-3
Sleeves cover both sides of the sling and can be moved to a specific location. Sleeves can also be re-positioned for quick and easy inspection of the sling.
*
$12.84

2" Wide Endless Sling | 3 Ply

EN3-902P
One of the most versatile nylon web slings available, Endless slings can be rotated to provide an infinite number of contact points for the ends of the endless lifting strap and where the endless sling lift strap contacts the load. Endless hoisting slings and straps are for use in choker, vertical and basket hitches. Endless sling strap ends can be tapered and reinforced on request. Endless polyester and nylon sling straps are also referred to as continuous loop slings, type 5 slings and/or grommet slings. Lift-It® Endless slings are available in either nylon or polyester webbing, polyester is the standard material on all models. The length of an endless web sling is measured pull to pull or bearing to bearing on the ends of the endless nylon lift strap, not circumferentially. Polyester web and Nylon web endless slings are formed by overlapping the ends of the heavy duty webbing to form a load carrying splice. It is recommended when using endless sling straps that the load carrying splice NOT be placed into the load or lift connection points. Likewise, when Endless slings are used in a choker hitch it is recommended that the load carrying splice be placed above the choker point and below the lifting fixture. If an endless sling configuration is desired that does not feature a load carrying splice, we’d recommend the use of a polyester roundsling. Polyester round slings are also sometimes referred to as spansets. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*
$73.02

1" Wide Eye & Eye Sling | 4 Ply | Heavy Duty

EE4-901P
Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point unless otherwise specified. Eye & Eye nylon & polyester lifting slings featuring flat eyes can be used in all three hitches: choker, vertical and basket. Heavy duty nylon rigging slings featuring the Flat Eye and Eye design are made in widths ranging from as narrow as 1 inch and as wide as 12 inches. All Lift-It® Flat Eye & Eye slings feature protection at the sling eye bearing points. The extra protection wrapped around the sling eye provides additional service life as this is a critical wear area for all polyester and nylon rigging slings. Sling eyes are automatically tapered to a narrower width on Eye and Eye lifting slings that are over 3 inches in width. At Lift-It we do not charge extra to taper the eyes for your 2 inch wide rigging straps. Flat Eye, Eye and Eye nylon lifting slings used by crane and rigging customers around the world provide for the lowest profile eye available. Low profile eyes make sling removal easier when tight clearances are unavoidable. Nylon rigging slings that feature flat eyes are also referred to as double eye slings or Type 3 slings. If a more supple body composition is desired consider using Lift-It® polyester roundslings in the eye and eye style. Eye & Eye polyester round slings are formed by passing an exterior sleeve over the strands of the polyester roundsling. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*
$40.90

4" Wide Quick Chap Cordura® Felt Sleeve | 1/4" Thick

CHQS250-4
Lift-It® Felt Sleeves blend two wear protection materials: Polyester Felt covered by Bulked Nylon, chap sleeves.
*
$39.53

3" Wide Eye & Eye Sling | 2 Ply | Light Duty

EE2-603P
Eye and Eye slings can be used in choker, vertical and basket hitches. Slings with Half Twist (Type 4) eyes are furnished unless Flat (Type 3) eyes are specified. Sling eyes will be wrapped at the bearing point unless otherwise specified. Eye & Eye nylon & polyester lifting slings featuring flat eyes can be used in all three hitches: choker, vertical and basket. Heavy duty nylon rigging slings featuring the Flat Eye and Eye design are made in widths ranging from as narrow as 1 inch and as wide as 12 inches. All Lift-It® Flat Eye & Eye slings feature protection at the sling eye bearing points. The extra protection wrapped around the sling eye provides additional service life as this is a critical wear area for all polyester and nylon rigging slings. Sling eyes are automatically tapered to a narrower width on Eye and Eye lifting slings that are over 3 inches in width. At Lift-It we do not charge extra to taper the eyes for your 2 inch wide rigging straps. Flat Eye, Eye and Eye nylon lifting slings used by crane and rigging customers around the world provide for the lowest profile eye available. Low profile eyes make sling removal easier when tight clearances are unavoidable. Nylon rigging slings that feature flat eyes are also referred to as double eye slings or Type 3 slings. If a more supple body composition is desired consider using Lift-It® polyester roundslings in the eye and eye style. Eye & Eye polyester round slings are formed by passing an exterior sleeve over the strands of the polyester roundsling. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.
*
$38.64
Lift-It