Lift-It

Felt Sleeves with Velcro provide protection from abrasion damage caused by contact with rough surfaces.

Felt Sleeves with Velcro provide protection from abrasion damage caused by contact with rough surfaces.

Felt Sleeves with Velcro provide protection from abrasion damage caused by contact with rough surfaces.

Quick Tubular Sleeves are available in Bulked Nylon, Web and Felt.

Quick Tubular Sleeves are available in Bulked Nylon, Web and Felt.

Quick Tubular Sleeves are available in Bulked Nylon, Web and Felt.

Quick Tubular Sleeves are available in Bulked Nylon, Web and Felt.

Sleeves cover both sides of the sling and can be moved to a specific location. Sleeves can also be re-positioned for quick and easy inspection of the sling.

Reversed Eye slings are nylon web slings which feature sling eyes and body that are covered by Bulked Nylon, also referred to as Cordura®, wear pads. Bulked Nylon wear pad material is four times more abrasion resistant than webbing used in regular nylon lifting slings, but provides no protection against cutting. The Reversed Eye lift strap is also referred to as a Return Eye sling. Since the body of Reversed Eye slings is based upon an endless sling design, the web strap eye is one half the overall body width. The sling eye can further be reduced by tapering the sling eye before installing the Cordura® wear pads on each side of the sling body. When you receive the Reversed Eye sling, the sling capacity tag is on the side OPPOSITE the working face or load contact surface of the sling. Responsible sling users in the sling, rigging and material handling industries always inspect the sling before each use. When abrasion is detected that does not penetrate into the load bearing sling webbing the sling user can rotate or “reverse” the sling eyes, which also provides a new bearing surface on the sling body. The bearing points of Reversed Eye hoisting sling-Standard (Type 6) eyes are 90° to the web sling body. The perpendicular relationship between the eye and body in a Reversed Eye lifting sling-Standard (Type 6) results in a better choke hitch, when compared to the Reversed Eye hoisting sling-Flat (Type 7). The Reversed Eye sling-Flat (Type 7) body is turned 180°, forming an eye, in the same plane as the sling body. The type 7 or flat Reverse Eye web sling is not frequently made, but provides a lower profile lifting sling for removal when space is limited. Type 6 and Type 7 Reversed Eye web slings can be used in choker, vertical or basket hitches. Standard widths for Reversed eye nylon web slings range from 2 inches to 6 inches. On request we can manufacture 8, 10 and 12 inch wide Reverse Eye lifting slings. Stock numbers for Reverse Eye slings do not reflect the overall sling width, but refer to the width of the component webbing, laid side by side to form up the body of the Reversed Eye lifting strap. An example would be, RE2-902 which would be the call out for a Reversed Eye web sling that is made from heavy duty nylon sling material (9800 Lbs. unsewn tensile strength- Class 7), 2 inches wide and two ply thick. The 2 inch material is sewn into an endless web sling configuration with the strands of the endless set side by side. After the eye buffers have been sewn to each side of the sling eye, 4 inch material is used to finish the fabrication of the nylon lifting sling. Sometimes it’s a hard sell to convince sling users that it is a better investment to spend more for a Reversed Eye sling. Reversed Eye web slings are roughly twice the price of an equivalent strength Eye and Eye sling. The combination of wear resistant materials, coupled with the ability to change out the bearing surfaces on the sling eyes and bodies make the Reversed Eye hoisting strap, the nylon sling of choice for professionals in the heavy duty sling, rigging and crane industries. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Reversed Eye slings are nylon web slings which feature sling eyes and body that are covered by Bulked Nylon, also referred to as Cordura®, wear pads. Bulked Nylon wear pad material is four times more abrasion resistant than webbing used in regular nylon lifting slings, but provides no protection against cutting. The Reversed Eye lift strap is also referred to as a Return Eye sling. Since the body of Reversed Eye slings is based upon an endless sling design, the web strap eye is one half the overall body width. The sling eye can further be reduced by tapering the sling eye before installing the Cordura® wear pads on each side of the sling body. When you receive the Reversed Eye sling, the sling capacity tag is on the side OPPOSITE the working face or load contact surface of the sling. Responsible sling users in the sling, rigging and material handling industries always inspect the sling before each use. When abrasion is detected that does not penetrate into the load bearing sling webbing the sling user can rotate or “reverse” the sling eyes, which also provides a new bearing surface on the sling body. The bearing points of Reversed Eye hoisting sling-Standard (Type 6) eyes are 90° to the web sling body. The perpendicular relationship between the eye and body in a Reversed Eye lifting sling-Standard (Type 6) results in a better choke hitch, when compared to the Reversed Eye hoisting sling-Flat (Type 7). The Reversed Eye sling-Flat (Type 7) body is turned 180°, forming an eye, in the same plane as the sling body. The type 7 or flat Reverse Eye web sling is not frequently made, but provides a lower profile lifting sling for removal when space is limited. Type 6 and Type 7 Reversed Eye web slings can be used in choker, vertical or basket hitches. Standard widths for Reversed eye nylon web slings range from 2 inches to 6 inches. On request we can manufacture 8, 10 and 12 inch wide Reverse Eye lifting slings. Stock numbers for Reverse Eye slings do not reflect the overall sling width, but refer to the width of the component webbing, laid side by side to form up the body of the Reversed Eye lifting strap. An example would be, RE2-902 which would be the call out for a Reversed Eye web sling that is made from heavy duty nylon sling material (9800 Lbs. unsewn tensile strength- Class 7), 2 inches wide and two ply thick. The 2 inch material is sewn into an endless web sling configuration with the strands of the endless set side by side. After the eye buffers have been sewn to each side of the sling eye, 4 inch material is used to finish the fabrication of the nylon lifting sling. Sometimes it’s a hard sell to convince sling users that it is a better investment to spend more for a Reversed Eye sling. Reversed Eye web slings are roughly twice the price of an equivalent strength Eye and Eye sling. The combination of wear resistant materials, coupled with the ability to change out the bearing surfaces on the sling eyes and bodies make the Reversed Eye hoisting strap, the nylon sling of choice for professionals in the heavy duty sling, rigging and crane industries. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Reversed Eye slings are nylon web slings which feature sling eyes and body that are covered by Bulked Nylon, also referred to as Cordura®, wear pads. Bulked Nylon wear pad material is four times more abrasion resistant than webbing used in regular nylon lifting slings, but provides no protection against cutting. The Reversed Eye lift strap is also referred to as a Return Eye sling. Since the body of Reversed Eye slings is based upon an endless sling design, the web strap eye is one half the overall body width. The sling eye can further be reduced by tapering the sling eye before installing the Cordura® wear pads on each side of the sling body. When you receive the Reversed Eye sling, the sling capacity tag is on the side OPPOSITE the working face or load contact surface of the sling. Responsible sling users in the sling, rigging and material handling industries always inspect the sling before each use. When abrasion is detected that does not penetrate into the load bearing sling webbing the sling user can rotate or “reverse” the sling eyes, which also provides a new bearing surface on the sling body. The bearing points of Reversed Eye hoisting sling-Standard (Type 6) eyes are 90° to the web sling body. The perpendicular relationship between the eye and body in a Reversed Eye lifting sling-Standard (Type 6) results in a better choke hitch, when compared to the Reversed Eye hoisting sling-Flat (Type 7). The Reversed Eye sling-Flat (Type 7) body is turned 180°, forming an eye, in the same plane as the sling body. The type 7 or flat Reverse Eye web sling is not frequently made, but provides a lower profile lifting sling for removal when space is limited. Type 6 and Type 7 Reversed Eye web slings can be used in choker, vertical or basket hitches. Standard widths for Reversed eye nylon web slings range from 2 inches to 6 inches. On request we can manufacture 8, 10 and 12 inch wide Reverse Eye lifting slings. Stock numbers for Reverse Eye slings do not reflect the overall sling width, but refer to the width of the component webbing, laid side by side to form up the body of the Reversed Eye lifting strap. An example would be, RE2-902 which would be the call out for a Reversed Eye web sling that is made from heavy duty nylon sling material (9800 Lbs. unsewn tensile strength- Class 7), 2 inches wide and two ply thick. The 2 inch material is sewn into an endless web sling configuration with the strands of the endless set side by side. After the eye buffers have been sewn to each side of the sling eye, 4 inch material is used to finish the fabrication of the nylon lifting sling. Sometimes it’s a hard sell to convince sling users that it is a better investment to spend more for a Reversed Eye sling. Reversed Eye web slings are roughly twice the price of an equivalent strength Eye and Eye sling. The combination of wear resistant materials, coupled with the ability to change out the bearing surfaces on the sling eyes and bodies make the Reversed Eye hoisting strap, the nylon sling of choice for professionals in the heavy duty sling, rigging and crane industries. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Reversed Eye slings are nylon web slings which feature sling eyes and body that are covered by Bulked Nylon, also referred to as Cordura®, wear pads. Bulked Nylon wear pad material is four times more abrasion resistant than webbing used in regular nylon lifting slings, but provides no protection against cutting. The Reversed Eye lift strap is also referred to as a Return Eye sling. Since the body of Reversed Eye slings is based upon an endless sling design, the web strap eye is one half the overall body width. The sling eye can further be reduced by tapering the sling eye before installing the Cordura® wear pads on each side of the sling body. When you receive the Reversed Eye sling, the sling capacity tag is on the side OPPOSITE the working face or load contact surface of the sling. Responsible sling users in the sling, rigging and material handling industries always inspect the sling before each use. When abrasion is detected that does not penetrate into the load bearing sling webbing the sling user can rotate or “reverse” the sling eyes, which also provides a new bearing surface on the sling body. The bearing points of Reversed Eye hoisting sling-Standard (Type 6) eyes are 90° to the web sling body. The perpendicular relationship between the eye and body in a Reversed Eye lifting sling-Standard (Type 6) results in a better choke hitch, when compared to the Reversed Eye hoisting sling-Flat (Type 7). The Reversed Eye sling-Flat (Type 7) body is turned 180°, forming an eye, in the same plane as the sling body. The type 7 or flat Reverse Eye web sling is not frequently made, but provides a lower profile lifting sling for removal when space is limited. Type 6 and Type 7 Reversed Eye web slings can be used in choker, vertical or basket hitches. Standard widths for Reversed eye nylon web slings range from 2 inches to 6 inches. On request we can manufacture 8, 10 and 12 inch wide Reverse Eye lifting slings. Stock numbers for Reverse Eye slings do not reflect the overall sling width, but refer to the width of the component webbing, laid side by side to form up the body of the Reversed Eye lifting strap. An example would be, RE2-902 which would be the call out for a Reversed Eye web sling that is made from heavy duty nylon sling material (9800 Lbs. unsewn tensile strength- Class 7), 2 inches wide and two ply thick. The 2 inch material is sewn into an endless web sling configuration with the strands of the endless set side by side. After the eye buffers have been sewn to each side of the sling eye, 4 inch material is used to finish the fabrication of the nylon lifting sling. Sometimes it’s a hard sell to convince sling users that it is a better investment to spend more for a Reversed Eye sling. Reversed Eye web slings are roughly twice the price of an equivalent strength Eye and Eye sling. The combination of wear resistant materials, coupled with the ability to change out the bearing surfaces on the sling eyes and bodies make the Reversed Eye hoisting strap, the nylon sling of choice for professionals in the heavy duty sling, rigging and crane industries. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Reversed Eye slings are nylon web slings which feature sling eyes and body that are covered by Bulked Nylon, also referred to as Cordura®, wear pads. Bulked Nylon wear pad material is four times more abrasion resistant than webbing used in regular nylon lifting slings, but provides no protection against cutting. The Reversed Eye lift strap is also referred to as a Return Eye sling. Since the body of Reversed Eye slings is based upon an endless sling design, the web strap eye is one half the overall body width. The sling eye can further be reduced by tapering the sling eye before installing the Cordura® wear pads on each side of the sling body. When you receive the Reversed Eye sling, the sling capacity tag is on the side OPPOSITE the working face or load contact surface of the sling. Responsible sling users in the sling, rigging and material handling industries always inspect the sling before each use. When abrasion is detected that does not penetrate into the load bearing sling webbing the sling user can rotate or “reverse” the sling eyes, which also provides a new bearing surface on the sling body. The bearing points of Reversed Eye hoisting sling-Standard (Type 6) eyes are 90° to the web sling body. The perpendicular relationship between the eye and body in a Reversed Eye lifting sling-Standard (Type 6) results in a better choke hitch, when compared to the Reversed Eye hoisting sling-Flat (Type 7). The Reversed Eye sling-Flat (Type 7) body is turned 180°, forming an eye, in the same plane as the sling body. The type 7 or flat Reverse Eye web sling is not frequently made, but provides a lower profile lifting sling for removal when space is limited. Type 6 and Type 7 Reversed Eye web slings can be used in choker, vertical or basket hitches. Standard widths for Reversed eye nylon web slings range from 2 inches to 6 inches. On request we can manufacture 8, 10 and 12 inch wide Reverse Eye lifting slings. Stock numbers for Reverse Eye slings do not reflect the overall sling width, but refer to the width of the component webbing, laid side by side to form up the body of the Reversed Eye lifting strap. An example would be, RE2-902 which would be the call out for a Reversed Eye web sling that is made from heavy duty nylon sling material (9800 Lbs. unsewn tensile strength- Class 7), 2 inches wide and two ply thick. The 2 inch material is sewn into an endless web sling configuration with the strands of the endless set side by side. After the eye buffers have been sewn to each side of the sling eye, 4 inch material is used to finish the fabrication of the nylon lifting sling. Sometimes it’s a hard sell to convince sling users that it is a better investment to spend more for a Reversed Eye sling. Reversed Eye web slings are roughly twice the price of an equivalent strength Eye and Eye sling. The combination of wear resistant materials, coupled with the ability to change out the bearing surfaces on the sling eyes and bodies make the Reversed Eye hoisting strap, the nylon sling of choice for professionals in the heavy duty sling, rigging and crane industries. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Reversed Eye slings are nylon web slings which feature sling eyes and body that are covered by Bulked Nylon, also referred to as Cordura®, wear pads. Bulked Nylon wear pad material is four times more abrasion resistant than webbing used in regular nylon lifting slings, but provides no protection against cutting. The Reversed Eye lift strap is also referred to as a Return Eye sling. Since the body of Reversed Eye slings is based upon an endless sling design, the web strap eye is one half the overall body width. The sling eye can further be reduced by tapering the sling eye before installing the Cordura® wear pads on each side of the sling body. When you receive the Reversed Eye sling, the sling capacity tag is on the side OPPOSITE the working face or load contact surface of the sling. Responsible sling users in the sling, rigging and material handling industries always inspect the sling before each use. When abrasion is detected that does not penetrate into the load bearing sling webbing the sling user can rotate or “reverse” the sling eyes, which also provides a new bearing surface on the sling body. The bearing points of Reversed Eye hoisting sling-Standard (Type 6) eyes are 90° to the web sling body. The perpendicular relationship between the eye and body in a Reversed Eye lifting sling-Standard (Type 6) results in a better choke hitch, when compared to the Reversed Eye hoisting sling-Flat (Type 7). The Reversed Eye sling-Flat (Type 7) body is turned 180°, forming an eye, in the same plane as the sling body. The type 7 or flat Reverse Eye web sling is not frequently made, but provides a lower profile lifting sling for removal when space is limited. Type 6 and Type 7 Reversed Eye web slings can be used in choker, vertical or basket hitches. Standard widths for Reversed eye nylon web slings range from 2 inches to 6 inches. On request we can manufacture 8, 10 and 12 inch wide Reverse Eye lifting slings. Stock numbers for Reverse Eye slings do not reflect the overall sling width, but refer to the width of the component webbing, laid side by side to form up the body of the Reversed Eye lifting strap. An example would be, RE2-902 which would be the call out for a Reversed Eye web sling that is made from heavy duty nylon sling material (9800 Lbs. unsewn tensile strength- Class 7), 2 inches wide and two ply thick. The 2 inch material is sewn into an endless web sling configuration with the strands of the endless set side by side. After the eye buffers have been sewn to each side of the sling eye, 4 inch material is used to finish the fabrication of the nylon lifting sling. Sometimes it’s a hard sell to convince sling users that it is a better investment to spend more for a Reversed Eye sling. Reversed Eye web slings are roughly twice the price of an equivalent strength Eye and Eye sling. The combination of wear resistant materials, coupled with the ability to change out the bearing surfaces on the sling eyes and bodies make the Reversed Eye hoisting strap, the nylon sling of choice for professionals in the heavy duty sling, rigging and crane industries. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Reversed Eye slings are nylon web slings which feature sling eyes and body that are covered by Bulked Nylon, also referred to as Cordura®, wear pads. Bulked Nylon wear pad material is four times more abrasion resistant than webbing used in regular nylon lifting slings, but provides no protection against cutting. The Reversed Eye lift strap is also referred to as a Return Eye sling. Since the body of Reversed Eye slings is based upon an endless sling design, the web strap eye is one half the overall body width. The sling eye can further be reduced by tapering the sling eye before installing the Cordura® wear pads on each side of the sling body. When you receive the Reversed Eye sling, the sling capacity tag is on the side OPPOSITE the working face or load contact surface of the sling. Responsible sling users in the sling, rigging and material handling industries always inspect the sling before each use. When abrasion is detected that does not penetrate into the load bearing sling webbing the sling user can rotate or “reverse” the sling eyes, which also provides a new bearing surface on the sling body. The bearing points of Reversed Eye hoisting sling-Standard (Type 6) eyes are 90° to the web sling body. The perpendicular relationship between the eye and body in a Reversed Eye lifting sling-Standard (Type 6) results in a better choke hitch, when compared to the Reversed Eye hoisting sling-Flat (Type 7). The Reversed Eye sling-Flat (Type 7) body is turned 180°, forming an eye, in the same plane as the sling body. The type 7 or flat Reverse Eye web sling is not frequently made, but provides a lower profile lifting sling for removal when space is limited. Type 6 and Type 7 Reversed Eye web slings can be used in choker, vertical or basket hitches. Standard widths for Reversed eye nylon web slings range from 2 inches to 6 inches. On request we can manufacture 8, 10 and 12 inch wide Reverse Eye lifting slings. Stock numbers for Reverse Eye slings do not reflect the overall sling width, but refer to the width of the component webbing, laid side by side to form up the body of the Reversed Eye lifting strap. An example would be, RE2-902 which would be the call out for a Reversed Eye web sling that is made from heavy duty nylon sling material (9800 Lbs. unsewn tensile strength- Class 7), 2 inches wide and two ply thick. The 2 inch material is sewn into an endless web sling configuration with the strands of the endless set side by side. After the eye buffers have been sewn to each side of the sling eye, 4 inch material is used to finish the fabrication of the nylon lifting sling. Sometimes it’s a hard sell to convince sling users that it is a better investment to spend more for a Reversed Eye sling. Reversed Eye web slings are roughly twice the price of an equivalent strength Eye and Eye sling. The combination of wear resistant materials, coupled with the ability to change out the bearing surfaces on the sling eyes and bodies make the Reversed Eye hoisting strap, the nylon sling of choice for professionals in the heavy duty sling, rigging and crane industries. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Sleeves cover both sides of the sling and can be moved to a specific location. Sleeves can also be re-positioned for quick and easy inspection of the sling.

Lift-It® Felt Sleeves blend two wear protection materials: Polyester Felt covered by Bulked Nylon, chap sleeves.

Felt Sleeves provide protection from abrasion damage caused by contact with rough surfaces.

Felt Sleeves provide protection from abrasion damage caused by contact with rough surfaces.

Felt Sleeves provide protection from abrasion damage caused by contact with rough surfaces.

Sleeves cover both sides of the sling and can be moved to a specific location. Sleeves can also be re-positioned for quick and easy inspection of the sling.

Basket Hardware Slings feature fittings of aluminum (ABH) or alloy steel (SBH). Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Basket Hardware Slings feature fittings of aluminum (ABH) or alloy steel (SBH). Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Basket Hardware Slings feature fittings of aluminum (ABH) or alloy steel (SBH). Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Aluminum and alloy steel choker fittings provide for the most efficient choke hitching available for webbing slings. Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Aluminum and alloy steel choker fittings provide for the most efficient choke hitching available for webbing slings. Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Aluminum and alloy steel choker fittings provide for the most efficient choke hitching available for webbing slings. Steel fittings are automatically supplied on two and four ply slings. Recycle your fittings for cost savings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

The first truly ergonomic sling, Twin-Path® Extra Slings (TUFXKS a.k.a. TPXC) are used worldwide in place of wire rope slings for heavy lifts. Twin-Path® Extra Slings weigh approximately 10% of comparable strength, steel slings. Super strong and ultra-light, Twin-Path® Extra Slings rated at 600,000 Lbs. vertical capacity are standard items and larger capacity heavy lifting slings are available.

The first truly ergonomic sling, Twin-Path® Extra Slings (TUFXKS a.k.a. TPXC) are used worldwide in place of wire rope slings for heavy lifts. Twin-Path® Extra Slings weigh approximately 10% of comparable strength, steel slings. Super strong and ultra-light, Twin-Path® Extra Slings rated at 600,000 Lbs. vertical capacity are standard items and larger capacity heavy lifting slings are available.

Service repairs require the dump body to be elevated. Twin-Path® Haul Truck Dump Body Slings are designed to share the load of the truck dump body in a raised position.

Service repairs require the dump body to be elevated. Twin-Path® Haul Truck Dump Body Slings are designed to share the load of the truck dump body in a raised position.

Lift-It® Wheel Nets are used in pairs to handle vehicles of various sizes and weights. Standard models are offered for Style “R” Wheel Nets, but in many instances Wheel Nets are designed and fabricated to meet specific application requirements.

Lift-It® Wheel Nets are used in pairs to handle vehicles of various sizes and weights. Standard models are offered for Style “R” Wheel Nets, but in many instances Wheel Nets are designed and fabricated to meet specific application requirements.

Polyester endless round slings from Lift-It Manufacturing. Endless round sling configurations enable the user to rotate hook and load contact points, resulting in increased sling longevity. Lift-It® Polyester Roundslings are made of polyester core yarn covered by a seamless, tubular cover. The seamless round sling construction and tubular design of the cover helps to eliminate the premature rupturing of covers, characteristic of seamed roundslings. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Helicopter Long Lines are Manufactured and Tagged to be ASME B30.9-Chapter 4 Compliant.

Lift-It® Soft Shackles can be used as a lightweight replacement for common heavy metal shackles. Each Lift-It® Soft Shackle is constructed from UHMPE rope and includes Cordura® tubular chafe protection. Lift-It® Soft Shackles are clearly labeled with Work Load Limits, won't rust and do not require three men and a small boy to carry! - Up to 109,500lbs Break - UHMPE PROLINE12 Braided Rope, coated with pigment dye. - Recovery range: Large Truck, SUV and large Overland vehicles. - Fabricated by hand in the U.S.A.

Wire Rope Saddle Protectors were developed to protect slings and loads. Bottom and Top Wire Rope Saddle Protectors are manufactured from lightweight manganese bronze and are easily positioned.

Wire Rope Saddle Protectors were developed to protect slings and loads. Bottom and Top Wire Rope Saddle Protectors are manufactured from lightweight manganese bronze and are easily positioned.

Adjustable Rope Slings are available in single, double and four leg configurations, standard Adjustable Rope Slings are made from single braid, twelve strand, polyester rope. The polyester rope is treated with a coating to optimize Adjustable Rope Sling service life.

Adjustable Rope Slings replace multiple, “non-adjustable” slings by accommodating a range of dimensional requirements with infinite adjustability. Available in single, double and four leg configurations, standard Adjustable Rope Slings are made from single braid, twelve strand, polyester rope. The polyester rope is treated with a coating to optimize Adjustable Rope Sling service life.

Helicopter Long Lines are Manufactured and Tagged to be ASME B30.9-Chapter 4 Compliant.

Adjustable Rope Slings replace multiple, “non-adjustable” slings by accommodating a range of dimensional requirements with infinite adjustability. Available in single, double and four leg configurations, standard Adjustable Rope Slings are made from single braid, twelve strand, polyester rope. The polyester rope is treated with a coating to optimize Adjustable Rope Sling service life.