Crosby

Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull.

Alloy Steel, Quenched and Tempered

G-209 / S-209

G-2140 / S-2140

G-209 A

G-2130 / S-2130

G-2150 / S-2150

End fittings are Quenched and Tempered; bodies are heat treated by normalizing. Hot Dip galvanized steel. Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckle sizes 1/4” through 2-1/2” a shackle one size smaller can be reeved through eye.

Forged Alloy Steel, Quenched and Tempered. Individually Proof Tested to 2-1/2 times Work Load Limit with certification.

Alloy Steel, Quenched and Tempered. Individually Proof Tested to 2-1/2 times Work Load Limit with certification.

Alloy Steel, Quenched and Tempered. Individually Proof Tested to 2-1/2 times Work Load Limit with certification.

Available in carbon steel and alloy steel. Design Factor for Carbon Steel - 5 to 1. Design Factor for Alloy Steel- 4 to 1. Eye hooks are load rated.

Meets the performance requirements of Federal Specifications FF-T-791b, Type 1, Form 1 - CLASS 5, and ASTM F-1145, except for those provisions required of the contractor.

Quenched and Tempered. Hot Dip galvanized steel. Hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigue properties.

End fittings are Quenched and Tempered; bodies are heat treated by normalizing. Hot Dip alvanized steel. Forged jaw ends are fitted with bolts and nuts for 1/4” through 5/8” and pins with cotters for 3/4” through 2-3/4” sizes. Modified UNJ thread on end fittings for improved fatigue properties.

Suitable for use with both Grade 80 and Grade 100 chain. Individually Proof Tested to 2-1/2 times Work Load Limit with certification. Locking system that provides for simple assembly and disassembly - no special tools needed.

G-213 / S-213

G-215 / S-215

G-2169 / S-2169

G-210 / S-210

Forged Alloy Steel, Quenched and Tempered.

Forged, Quenched and Tempered Load Rated

S-209T

The web sling hook eye is designed with a wide beam surface to eliminate bunching effects. Web Sling Hooks are supplied with latches.

S-281 Designed to connect web and roundslings to eyebolts and lifting lugs.

G-2160 / S-2160

Quenched and Tempered. Hot Dip galvanized steel. Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckle sizes 1/4” through 2-1/2”, a shackle one size smaller can be reeved through eye. Modified UNJ thread for improved fatigue properties. Fatigue Rated.

S237 High Performance Sling Connectors are designed to easily connect HP slings to masterlinks or eye hooks for the creation of bridle assemblies. The Metal-on-Metal “hinge point” enables increased sling longevity and efficiency.

High Performance Sling Connectors allow slings to be joined together.

Quenched and Tempered. Hot Dip galvanized steel. Forged jaw ends are fitted with bolts and nuts on sizes 1/4” through 5/8” and pins with cotters on sizes 3/4” through 2-3/4”. Modified UNJ thread for improved fatigue properties. Fatigue Rated.

Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull. For angle loading,

Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull. For angle loading,

Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull. For angle loading,

Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull. For angle loading,

Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull. For angle loading,

Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull. For angle loading,

Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull. For angle loading,

Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull. For angle loading,

Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull. For angle loading,

Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull. For angle loading,

Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull. For angle loading,

Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull. For angle loading,

Forged Steel, Quenched and Tempered. Fatigue rated at 1-1/2 times Work Load Limit for 20,000 cycles. Work Load Limits shown are for in-line pull. For angle loading,

Single leg slings. S237 and S238 High Performance Sling Connectors are designed to easily adapt to other Crosby fittings to develop complete systems for High Performance Slings.

Designed to reduce friction, abrasion and fraying in the area of choke. Replacement spools and covers are available.