Lift-It

Reversed Eye slings are nylon web slings which feature sling eyes and body that are covered by Bulked Nylon, also referred to as Cordura®, wear pads. Bulked Nylon wear pad material is four times more abrasion resistant than webbing used in regular nylon lifting slings, but provides no protection against cutting. The Reversed Eye lift strap is also referred to as a Return Eye sling. Since the body of Reversed Eye slings is based upon an endless sling design, the web strap eye is one half the overall body width. The sling eye can further be reduced by tapering the sling eye before installing the Cordura® wear pads on each side of the sling body. When you receive the Reversed Eye sling, the sling capacity tag is on the side OPPOSITE the working face or load contact surface of the sling. Responsible sling users in the sling, rigging and material handling industries always inspect the sling before each use. When abrasion is detected that does not penetrate into the load bearing sling webbing the sling user can rotate or “reverse” the sling eyes, which also provides a new bearing surface on the sling body. The bearing points of Reversed Eye hoisting sling-Standard (Type 6) eyes are 90° to the web sling body. The perpendicular relationship between the eye and body in a Reversed Eye lifting sling-Standard (Type 6) results in a better choke hitch, when compared to the Reversed Eye hoisting sling-Flat (Type 7). The Reversed Eye sling-Flat (Type 7) body is turned 180°, forming an eye, in the same plane as the sling body. The type 7 or flat Reverse Eye web sling is not frequently made, but provides a lower profile lifting sling for removal when space is limited. Type 6 and Type 7 Reversed Eye web slings can be used in choker, vertical or basket hitches. Standard widths for Reversed eye nylon web slings range from 2 inches to 6 inches. On request we can manufacture 8, 10 and 12 inch wide Reverse Eye lifting slings. Stock numbers for Reverse Eye slings do not reflect the overall sling width, but refer to the width of the component webbing, laid side by side to form up the body of the Reversed Eye lifting strap. An example would be, RE2-902 which would be the call out for a Reversed Eye web sling that is made from heavy duty nylon sling material (9800 Lbs. unsewn tensile strength- Class 7), 2 inches wide and two ply thick. The 2 inch material is sewn into an endless web sling configuration with the strands of the endless set side by side. After the eye buffers have been sewn to each side of the sling eye, 4 inch material is used to finish the fabrication of the nylon lifting sling. Sometimes it’s a hard sell to convince sling users that it is a better investment to spend more for a Reversed Eye sling. Reversed Eye web slings are roughly twice the price of an equivalent strength Eye and Eye sling. The combination of wear resistant materials, coupled with the ability to change out the bearing surfaces on the sling eyes and bodies make the Reversed Eye hoisting strap, the nylon sling of choice for professionals in the heavy duty sling, rigging and crane industries. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Rope Cargo Nets are used to load and unload cargo using a lifting method that draws the corners of a net around its load to a gathered point located above the load providing secure and balanced lifting. Rope Cargo Nets can be used for a variety of lifting applications.

Lift-It® Felt Sleeves blend two wear protection materials: Polyester Felt covered by Bulked Nylon, chap sleeves.

Lift-It® Felt Sleeves blend two wear protection materials: Polyester Felt covered by Bulked Nylon, chap sleeves.

Sleeves cover both sides of the sling and can be moved to a specific location. Sleeves can also be re-positioned for quick and easy inspection of the sling.

Sleeves cover both sides of the sling and can be moved to a specific location. Sleeves can also be re-positioned for quick and easy inspection of the sling.

Felt Sleeves provide protection from abrasion damage caused by contact with rough surfaces.

Felt Sleeves provide protection from abrasion damage caused by contact with rough surfaces.

Lift-It® Bridle Assemblies feature combinations of links, fabric eyes and hooks for the efficient handling of loads with fixed lifting points. Synthetic Bridle Assemblies are lightweight and easy to handle when compared to wire and chain bridles. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

Single-Path Check-Fast® High Performance Roundslings are the only single path HP Single-Path Roundsling to feature the Check-Fast®, Overload Inspection System. Resilient K-Spec® Load Bearing Core Yarns are encapsulated by Covermax®, one of the most durable sling covers available.

Lift-It® Bridle Assembly capacities are lower than our competitors. (MLB3)Three Leg Bridle Assembly capacities are based upon 2-1/2 legs carrying the assigned capacity. If a 200% load test is required on your slings please contact our sales team prior to ordering, 909-469-2251.

The first truly ergonomic sling, Twin-Path® Extra Slings (TUFXKS a.k.a. TPXC) are used worldwide in place of wire rope slings for heavy lifts. Twin-Path® Extra Slings weigh approximately 10% of comparable strength, steel slings. Super strong and ultra-light, Twin-Path® Extra Slings rated at 600,000 Lbs. vertical capacity are standard items and larger capacity heavy lifting slings are available.

Twin-Path® Eye and Eye Slings are a perfect Slingmax® solution for applications requiring an eye and eye configuration. All the benefits of Twin-Path® are included in the Twin-Path® Eye & Eye Sling, which features a single body and integrated eyes. Slingmax Twin-Path® Eye and Eye Slings are available in larger sizes and lengths upon request.

Super strong, ultra-light Lift-It® UHMPE Rope Slings have similar elongation properties but are 1/7 the weight of heavy, cumbersome wire rope slings. UHMPE Rope Slings also offer the advantages of flexibility as well as the absence of lubricants and corrosion when compared to wire rope slings. Unlike wire rope slings, UHMPE Rope Slings are neutrally buoyant for ease of handling in diving, salvage, maintenance and marine construction activities for oil, gas and alternative energy companies. • Lift-It® UHMPE Rope Slings do not absorb water and sling capacity is not reduced while wet. • UHMPE Rope Slings are easy to inspect when compared to rigid wire rope slings and roundslings. • External and internal wear is more readily identifiable with 12 x 12 braided strand UHMPE Rope Slings. • UHMPE Rope Slings have recommended usage diameters that have been validated through destruction testing.